When pressing the Start/Cancel buttons nothing happens (no lights); all other buttons when pressed will light up. Have run thru the re-set cycle several times; washer will turn on, go thru a very short cycles and then shutoff. At the start of the reset cycle all lights will go on. (including the start/cancel lights.) As the washer goes thru the cycles the lights will turn on and then off. Still nothing from the Start / Cancel button.
SOURCE: dishwasher won't start
jamcdani Most likely the problem with your dish washer is bad key pad. It is not repairable and has to be replaced. Whirlpool does not sell it separate and you have to by the whole console assembly. The price range is between $95 and $115 (different colors) and it is not very complicated to replace it. I can help you with the complete step by step instructions and, if you provide the complete model number of your dish washer, I get the part number and the best price for you. Gendos post back...
SOURCE: The only button that works is the cancel drain
Sounds like a keypad malfunction or the control board has gone bad.
SOURCE: When I press normal wash it lights up but no other buttons respon
No repreave there, your board must sadly be replaced.
115 views
Usually answered in minutes!
×