Change picture mode - JVC AV-48WP30 48" Rear Projection Television

If the picture mode is set to Cinema or Custom, the screen could become dark. If the screen is still dark after the picture quality mode has been changed, change the setting Backlight, Picture, Brightness and adjust the brightness to your taste. ... Depending on such settings, the picture brightness level can be higher or lower

open the panel of TV in front of your TV there is the button to change the mode try that button if this work then let me know

Hi,
The TV may be in Dynamic Mode - which would cause the screen to change brightness.
To change this you have to go to the picture settings and change it to Normal mode or cinema mode etc.

Go in the tv menu,right at bat u in the Picture mode go down the menu to reset push it.The Tuner board will reset it self.It will be set on the Dynantic fixed mode.And the AV mode button on the remote should able to changes back and fourth again Dynamic fix mode,Dynamic mode,Standard mode,User mode,Game mode.Not able to changes by pushing the remote button AV mode to changes,than ur Tuner board have problems,not working properly.

Hi Allonsoma,

What the manual doesn't tell you is that you need to change the REC mode first to be able to fint the buttons in MENU.

Fist go into the REC mode (the one above menu when taking a photo). Change this to PGM and click OK. Now go into MENU, on the 3/4 page second button down should be a box with a + in the corner. This is the colour mode option. You can now change to vivid, sepia or black and white.

Hope this helps.

select picture mode.press right arrow button to change your picture mode {vivid,sport,hi bright]to change sitting you much choose user mode.the other settings are factor settings.

i think you are in picture mode when the screen mode is changed then it will appear black and recording cannot be done beeing in that mode you have to change the screen mode into recording mode and then continue

it is 1/60 mode change it...
1/60 mode means it will take a scene 1/60 of the seconds....
change the mode and then try... your problem will be solved...
change to normal mode...
there are many modes available in ur cam just like 1/80 etc & so it means it will take 1 photo for 60 seconds i think i dnt know exactly but by changing this mode to normal mode you problem will be solved...
by using this 1/60 mode v can clearly see in the photo the dirt and grit also.....

It sounds like an eeprom issue. But you can try to reset the set. Turn the set off by the main power on the set. wait a minute or two then together push both the main power button and the standby power button. This should resett the tv. If that doesnt work you will need service as the zoom and the various modes are all controled by the eeprom. Only hold the two buttons for a second. sometimes you will hear the crts discharge while resetting.Hope this helps

Navigate the the rotating knob to manual or auto mode then shoot it then ok.