Model th-42px60u viera panasonic wont power on is there a solution

Return and get your money back - seems you have been had.

Sure the outlet you plugged it into has power?

My Panasonic is showing 22 blinking lights

try changing the fuse. here is the location.

I would send a email to [email protected] they may have one available or if not can get one.

If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Fuses do not blow (more than one) for no reason---which fuses and where?

10 blinks is usually power supply board but can be something connected to it.

Power supply board or related to it.

What I'm learning is there are several models of Panasonic TV's that have a video card that doesn't play well with HDMI applications and the end result is, you need to call this number and not only make arrangements to replace the bad board,but also this!
Your model doesn't show below,but I'd certinly inquire about the necessity of a "Firmware" update!,,,Panasonic knows FULL WELL they have a HUGE problem here!
Hope this helps!

At panasonic.ca I found the listing for the fw update under customer support-important notices

If you own a plasma TV with model and serial number within the range specified below, please contact our toll-free VIERA Concierge hotline service at 1-866-330-0014. A VIERA product expert will arrange an in-home software update for your TV at your convenience.



Model Numbers Serial Number Range

TH-42PZ77U

TH-42PZ700U **71250001 ~ **80189999

TH-42PZ700UA

On a Panasonic TV the 10-blink error code can sometimes be caused by low voltage running through an HDMI cable, particularly from a Media PC or some video game consoles. Try disconnecting any HDMI cables and unplugging the Television for 30 seconds, then power it on without the cables attached.

If this works, connect the cables to the front panel (usually HDMI-3) which uses a different controller board.