Change switch on washer/dryer - Whirlpool LTE5243D Top Load Stacked Washer/Dryer

Hotpoint red led flashes Washing Machines Questions ...

www.fixya.com > Forum > Tags > red led flashes > Washing Machines

Hotpoint washing machines red led flashes related questions and answers. ... then off When i turn on the washing machine - Hotpoint wf640p - the LED display flashes all the 8s (so ... Question about Aquarius WD640 Front Load Washer/Dryer.

first access the tech sheet and run any diagnostics it shows for the machine and if this passes,then check/change the fill switch on the control panel along with fill tube from the wash tub base if kinked or plugged

Could be mains choke. Mains power comes into mahine via wall socket /worth checking this then onto mains filter/Choke..then to switch..So if no power here check this..wish you well

make sure you have good air flow out the house if you do go ahead and change your thermostats and your high limit thermal switch.

Change the motor capacitor

sorry but the washer can not be changed. its strike has a lock and can not be reversed. the dryer can be changed, but the best thing to do is move the units and get some longer hoses for the washer.
hopefully you can switch the position of the units, but if not then you will be doing the laundry dance every time you do wash.

My twin stacking whirlpool washer/dry. The timer switch kicks on but does not dry clothes kicks off after 5 mins but, clothes still wet.

Try the valves inside the back where the water hoses connect to the machine they should default to the closed position when water is not required

Check the pressure switch, aka water level switch. If this isn't the problem, it may be the water valve.

change the pressure switch its the switch that you select the water level with