Question about Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White

Open Question

Why dose My kenmore electric ranger control panel says err.

The oven got very hot and the buzzer kept sounding.i

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: Kenmore Elite made by Frigidaire

The F30 error code indicates that the electronic oven control board detects an "open" oven temperature sensor probe circuit.
This is usually caused by a failed oven temperature sensor probe.

Replacing this component will likely fix your problem.

You can order this part from www.searspartsdirect.com website.

If you replace this part yourself, be sure that you unplug the range to disconnect electrical power before accessing this component.

On some models, you can replace the probe by removing the screws that mount this component to the inside back wall of the oven.
Carefully pull the probe inside the oven cavity until you encounter the wire harness disconnect plug.
Unplug the sensor and replace it with the new one. Mount the new probe on the back wall of the oven.

On some models, you have to remove the lower back oven panel to access the sensor probe.

If you replace the probe and still have this problem, you will need to unplug the range and measure the resistance through the violet wires that plug into the control board (this is where the sensor probe circuit is connected to the control board).
If the resistance through the oven temperature sensor probe circuit is normal (about 1100 ohms at room temperature) then the electronic oven control board will need to be replaced.


http://media.fotki.com/1_p,wbwdqtgkkqdrrfgxgtqsskgwtqkq,vi/ktrrwffdrxkddstsrtq/1/1303472/5961857/image45310img-or.jpg


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 26, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Err code on kenmore pro model 42003


you sold it so the buyer has the problem
tell him to get in an technician to advise on the fix and the cost.
Why I say this is simple ---you have no idea how it was installed or what the buyer did after he bought it so you are not responsible for the problem

Jan 17, 2016 | Kenmore 30" Double Electric Wall Oven 4200

1 Answer

Display panel is showing F1 and the buzzer is sounding?


This is a common failure that we repair on these control boards. Here's a link with some technical info that may help you out.
www.fixyourboard.com/techzone/ovens/f1_error/f1_error.html

Best Regards,
Bruce
www.fixyourboard.com

Mar 02, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

3 Answers

Volume control candy oven timer


Switch off the oven, leave for 5 seconds and switch it back on.
Candy Customer Services asked for over £100 to have an engineer sent to my house, which I refuse as I thought the oiven was good.
I had to switch off all the electricity in the kitchen but after this 'reset' the oven turned to the normal 'high' volume.

Jan 12, 2010 | Candy Ovens

1 Answer

I turned off the timer buzzer 24 hours ago and there's been some fairly loud motor sound running ever since.


My best guess would be that your blower motor is running. This could be because it is controled by a control board or a button thermostat that is shorted.

Dec 14, 2009 | Magic Chef 9815 Electric Single Oven

2 Answers

Electric Diagram for Kenmore Model 790


Has the oven run out of control or gotten too hot? The 790 series is made by Frigidaire and those fault codes are F0 to F8. F2 indicates the temperature sensor is reading too hot. Now with the double oven models, some manufactures add an extra digit to the fault codes to indicate which oven created the fault.

Your most likely fix is to replace the temperature sensor. The most probable locations for the wiring diagram is taped inside the bottom drawer, on the back or under side of the oven, or behind one of the panels on the back of the oven. This might tell you the room temperature resistance for the temperature sensor so you can test it with an ohmmeter and be sure that it is faulty. Try Appliance Parts Pros for replacement sensors.

Jan 09, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

4 Answers

My kenmore electronic stove is having a beep with code F1 on the


Please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacment of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal checksum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Dec 15, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Kenmore double-oven (electric)


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Sep 22, 2008 | Kenmore 47722 / 47724 / 47729 Electric...

Not finding what you are looking for?
Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...