JVC GR-D30U Camcorder "e03 safeguard mode" Questions

Get it fixed

JVCGR-D270.Digital Camcorder. When we put the tape in the cam it chews the tape whiles loading and says that it's in 03 safe guard mode. Please help.

I have a GR-D850U model JVC and its giving a message Unit in safeguard mode. How can I have this fixed ?

I stumbled upon this solution to your question:

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

In neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

I hope that helps.

I GOT

cvslkjsdflkds

According to http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/,

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

If you are getting E03 or E04 errors on every tape you try, it sounds like a servicing is required.

take a screw driver and open it up.

I tried Tapping on side of Camcorder and I worked, after 2 or three times while message appeared.

look for a tiny pinhole and insert a pin while powered up to reset