Why won't it fill? - Bosch WFK 2401

Hi Robin.
If the float gets stuck in the raised position, the dishwasher won't fill with water (Photo 3). Another likely cause is a clogged inlet screen or faulty inlet valve. ... If it doesn't, first make sure the float valve is operating freely (Photo 3). If this doesn't solve the problem, check the inlet valve and screen.

Dishwasher Repair Tips: Dishwasher Not Cleaning Dishes ' The ...

also try this link.

https://www.google.com/search?q=Dishwasher+fills+but+then+it+won%27t+wash.&rlz=1C1AVFC_enGB797GB798&oq=Dishwasher+fills+but+then+it+won%27t+wash.&aqs=chrome..69i57.3233j0j9&sourceid=chrome&ie=UTF-8

I think the control board is at fault

you need a new lid switch google model number and order new one

Please recheck that model number. It is coming up as a microwave.

The inlet solenoid is probably bad. And it won't agitate unless it fills and stops filling automatically.

Your lid switch has a fault, Sometimes the switch can bend which means that it won't always operate.

Hello John,
The most probable reason the washer is not filling is because of a blown fuse that is part of the lid switch asm. By UNPLUGGING THE WASHER and removing the 2 INNER screws on the the control panel and the control panel can be rotated down to see the fuse in the lid switch asm. Here is where the fuse is on the switch asm. its circled in red

Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch.

WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE please show me a diagram

check your lid switch if its a top load