Question about Mitsubishi WD-52525 52" Rear Projection HDTV

Open Question

Why can't i get an answer tfor my particular model, mitsubishi tv WD-73734?-

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
igop_oka29

Edwin Avilla

  • 317 Answers

SOURCE: My 73734 mitsubishi tv has

Try to re align the antenna of your t.v but if nothings happen Try to contact a t.v technician maybe your t.v has a problem with the picture tube

Posted on Jul 01, 2011

Ad

Azrael SRL

  • 11800 Answers

SOURCE: white dots on my mitsubishi WD-73734 tv screen

Your tv is a DLP projection one. In it the image is generated by projecting light on a chip that is covered in tiny mirrors that reflect more or less the light towards the screen. In your case some of those tiny mirrors are no longer controlled - they are immobile and reflect fully the light so you get a white spot on the screen.
The DMD chip that holds the mirrors is dying and you will have to replace it. This is the only place i could find that claims to have it on stock. You can also go thru Ebay, in there you will find second-hand ones extracted from defective tv's.
It's installation is strictly a job for a person with great tv repair experience - too many thins can go wrong in there if the job is not done properly.

Posted on Sep 15, 2011

joewolf68

Joseph Wolf

  • 25 Answers

SOURCE: Have a 73" mitsubishi model No.WD 73734 and I have

On the TV not the remote, simultaniously press the menu and input button for at least 5 seconds. This should give an error code. If it blinks 3 times then a pause then blinks 2 times, the code would be 32. Get your error code and look in the service book at: http://www.audiolabga.com/pdf/V36-V37-V38_Service_Manual.pdf -

Posted on Dec 16, 2011

joewolf68

Joseph Wolf

  • 25 Answers

SOURCE: My Mitsubishi WD-73734 TV will intermittently just

38 Lamp temperature abnormally high. Poor Air Circulation - found in service guide at - http://www.audiolabga.com/pdf/V36-V37-V38_Service_Manual.pdf

Posted on Dec 16, 2011

joewolf68

Joseph Wolf

  • 25 Answers

SOURCE: I have a Mitsubishi wd-73734'

Look for info in the Service Guide found here: http://www.audiolabga.com/pdf/V36-V37-V38_Service_Manual.pdf

Posted on Dec 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mitsubishi tv WD 73734 won't show a picture you can hear sound and it powers on and off lamp light red and timer lighter blinking


No TVs will behave that way due to a timer. TVs only will display a nag screen telling you to reset the timer. If your lamp is more than 2 years old, it is suspect of failure. Be sure you buy a lamp with an Osram brand or Philips brand bulb inside. Any compatible(knockoff)lamps will not perform as they should. Mitsubishi DLP TV Bulbs
These folks sell original Osram bulbs in their lamps and they have a 6 month warranty. I use them myself for repairs and really have had great experiences with them.

Sep 09, 2015 | Mitsubishi WD-73734 73" Television

1 Answer

Mitsubishi DLP TV wd-73734 HAS WHITE SPOTS


Bad optical light engine, most expensive part in set
12_10_2012_12_47_13_am.jpg

Dec 09, 2012 | Mitsubishi WD-65733 65" HDTV

1 Answer

Phone number to mitsubishi about there tv


Google "Mitsubishi customer Service" for the toll free number.

Apr 06, 2012 | Mitsubishi WD-73734 73" Television

1 Answer

Have a 73" mitsubishi model No.WD 73734 and I have


On the TV not the remote, simultaniously press the menu and input button for at least 5 seconds. This should give an error code. If it blinks 3 times then a pause then blinks 2 times, the code would be 32. Get your error code and look in the service book at: http://www.audiolabga.com/pdf/V36-V37-V38_Service_Manual.pdf -

Sep 22, 2011 | Mitsubishi WD-73734 73" Television

1 Answer

White dots on my mitsubishi WD-73734 tv screen


Your tv is a DLP projection one. In it the image is generated by projecting light on a chip that is covered in tiny mirrors that reflect more or less the light towards the screen. In your case some of those tiny mirrors are no longer controlled - they are immobile and reflect fully the light so you get a white spot on the screen.
The DMD chip that holds the mirrors is dying and you will have to replace it. This is the only place i could find that claims to have it on stock. You can also go thru Ebay, in there you will find second-hand ones extracted from defective tv's.
It's installation is strictly a job for a person with great tv repair experience - too many thins can go wrong in there if the job is not done properly.

Sep 15, 2011 | Mitsubishi WD-73734 73" Television

1 Answer

My Mitsubishi WD-73734 TV will intermittently just shut down- no picture, no sound, the set just turns off. When I check the TV for an "error code," I am able to identify error code # 38. What...


38 Lamp temperature abnormally high. Poor Air Circulation - found in service guide at - http://www.audiolabga.com/pdf/V36-V37-V38_Service_Manual.pdf

Dec 17, 2010 | Mitsubishi WD-73734 73" Television

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...