Screen black with a word navigation, not starting up

needs software update, if the screen it self works. when not try to look for faulty cable, fuse etc...

I have a 2007 Acura TL. The navigation system worked well, until 2017, when I decided not to renew it. Everything started to go wrong. It worked intermittently. Cost me job interviews, getting lost and being late. Did you receive a message, "See your dealership"? Well, the dealership was charging the same as the renewal price. A coincidence or an attempt to force the renewal? Well, I gave in. I just received the new navigation system (disc). It hasn't been installed as yet. Try reprogramming and find out how old the system is. A great car. The turning radius and the navigation system are my problems. Good luck.

If you ever found an answer to your problem I would really appreciate the help. Mine just started doing the same thing today. The screen has lines on it but the sound works fine. 2005 Jeep Grand Cherokee Limited. Thanks

I am too facting the same issue ...Reverted back to def. settings ...uninstalled all unused / downloaded applications but still screen goes black when i slide the set in / out. and i cannot hear on head set..i need to sweitch on the speaker to make and receive calls all the time

if you can see the reset button press it with a piece of wire located somewhwew around that area look for a small hole? reset look in manual?

THERE IS USUALLY A FUSE BEHIND THE UNIT IT SELF AND CHECK YOUR FUSE BOX

IT MIGHT BE UNDER THE STEERING WHEEL CLOSER TO THE DRIVER DOOR OR UNDER THE HOOD CLOSE TO THE BATTERY OR ACROSS ON THE PASSENGER SIDE

- press "scan" button, then press "start" button (either black or color)
- a small window (MP Navigator EX - MX310 series) should appear on your computer screen
- you can then choose one of the option there
- place a document or photo you want to scan on the canon plate face down
- then back to your computer screen and click "scan"

i have iMac and the pop up window says (MP Navigator EX - MX310 series) when i press "start" button on Canon
now i'm not sure if it'll say (MP Navigator EX - MX310 series) on windows PC
hope this helps. good luck.

turn off your PSP ,then switch on again.. when the screen are in black condition "press R button" and change the CPU speed

install new firmware

If a black box appears on the screen, and a small amount of the picture is visible around the border, it means that your closed captions are on and set to TEXT. Go back into the menu, navigate to the closed captions page and set the captions to OFF.