My whirlpool LSR7233EQO fills up for rinse but won't spin on any cycle

SOURCE: shutting down on rinse cycle

Hi this could means that you may need to replace the washing machine bearings. Once the bearings are bad, the motor overheats and it will automatically shut down after the first rinse.

Timonty from WashingMachineAdvisor.com

SOURCE: Whirlpool Model LSV6234AWO

door switch bad?

SOURCE: won't complete cycle, stops at rinse. and can't get hot water.

Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.

SOURCE: kenmore washer,mod# 110 26292694/wash cycle only

CHANGE THE LID SWITCH

SOURCE: Washer will not Spin during SPIN CYCLES

Check the lid switch. Through out time the lid switch housing can come apart from years of heat and cold. When I checked mine, I found the glue deterriated and the housing came apart. What I did to fix it is I zipped tied the housing together and did a functional check and it worked.