Question about Kenmore 22422 Top Load Washer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: shutting down on rinse cycle
Hi this could means that you may need to replace the washing machine bearings. Once the bearings are bad, the motor overheats and it will automatically shut down after the first rinse.
Timonty from WashingMachineAdvisor.com
Posted on Sep 02, 2008
Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.
Posted on Apr 04, 2009
Check the lid switch. Through out time the lid switch housing can come apart from years of heat and cold. When I checked mine, I found the glue deterriated and the housing came apart. What I did to fix it is I zipped tied the housing together and did a functional check and it worked.
Posted on Apr 25, 2009
Your air pressure tube going to the water level switch is pinched or stopped up,OR, the water level switch is going bad.
Use this manual to access these parts and diagnose which is bad.
Posted on Jan 16, 2010
Tips for a great answer:
Jan 22, 2013 | Washing Machines
Sep 12, 2011 | Washing Machines
Apr 02, 2009 | Whirlpool LSQ8543J
Feb 21, 2009 | Roper RAS8445KQ Top Load Washer
Dec 15, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
Nov 23, 2008 | Kenmore 63942 Dryer
Nov 20, 2008 | Washing Machines
Apr 01, 2007 | Frigidaire FWS833A Top Load Washer
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: