I need a wiring diagram for my Pride victory 3 wheel scooter. Where can I get one mine is all messed up?

You can get then from Prides website

Hi I found this type in .google search....,victory 9 wiring diagram ..good luck

Kenneth,
The wires have a plug on them with a clip that needs to be released to pull out of the controller. Hope this helps.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

You need to adjust the tow in. There is adjustment underneath.

hi sadly you won't however i can help , what's the problem ?

Regards
Rob

www.gewizrepairs.co.uk

manufacture's company!! call them!

Is your track rod bent or out of alignment? Carefully buy the exact wheels with tyres and a track rod if necessary from dismantled Victory XL scooters (a good wheel with a good tyre about €30 - I've done that for my Pride Celebrity XL8 - it was a great success.

Piggies might fly = Pride don't want you to go anywhere near one.

Hi, sounds like the speed pot that is attachment to the throttle lever is worn and needs replacing, this is normally a 5K pot,

Regards
GeWiz.

http://www.pridemobility.com/pdf/owners_manuals/US_Scooter/US_Victory_10_om.pdf

Click on this link and a pdf manual for a Victory 10 will appear.