Jam in cartridge area - HP LaserJet P2055d Printer

Here's a video that can help you with paper jams:

Clean all of the rubber feeders with alcohol/rubber restorer in the paper path of printer.

Clear jams from the print-cartridge area




1. Open the print-cartridge door, and remove the print cartridge.
Figure 18: removing print cartridge





2. With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the product.
Figure 19: removing jammed media


3. Replace the print cartridge and close the print-cartridge door.
Figure 20: reinstalling the print cartridge



For any other Jam types Visit the following link : HP Lasterjet M1522

Regards,
Shrey

Welcome to FixYa!

If the first symbol on the top is constantly blinking as shown in the picture below, It means that a paper or a foreign object has jammed your printer.



Jam can occur in 3 areas. Please refer to the image below.
1. Internal Areas
2. Input Trays
3. The Output Bins


To clear the jam, turn the printer off and disconnect the power cord. Be careful not to tear the paper in case of a paper jam. If a small piece of paper remains in the printer, it could cause additional paper jam.

Let's clear out the Internal Areas first. Push the button to open the print-cartridge door, and then remove the print cartridge. To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper. Please refer to the image below.


If jammed paper is visible, grasp it with both hands and slowly pull it out of the printer. Please refer to the image below.

If no paper was jammed inside the print-cartridge door, open the Output Bin or the back door
of the printer. To avoid damaging the printer, do not attempt to clear a jam in the top output bin by pulling the paper straight out.

Again, if jammed paper is visible, grasp it with both hands and slowly pull it out of the printer.
If no paper or foreign object is visible, close the back door of the printer.

Next, let's take a look at the Input Tray. (We have already taken out the print cartridge.)
Lift the Tray 1 roller cover, grasp the jammed paper or foreign object, and slowly pull it out of the printer. Please refer to the image below.

If no jammed paper is or foreign object is visible, open Tray 2 and see if a paper is visible. Again remove it slowly with both hands. Please refer to the image below.

Close Tray 2.
If no jammed paper is visible in the second tray area, pull down the upper media guide (we have already taken out the print cartridge). With both hands, grasp the jammed paper and slowly pull it out of the printer. Please refer to the image below.

Close the upper media guide and return back the print cartridge. Please refer to the image below.


These steps should clear out any jams that you are experiencing.
Connect back the power cord again and turn on your printer. You should be able to print now.

Thanks for using FixYa. Keep me posted.
Jas247

Does it say "cartridge jam" or "jam in cartridge area"?

If it is the latter open the door and remove the jam.
Then press the SELECT button to continue.

Replace your paper pickups and set your paper tray setting correct, both in the tray and the settings menu. That should help you out. The part# for paper-pickups is RF5-3739.

Hi usually paper jam at paper input area a or transfor section(photo drum area or fuser unit area, so you may try:
1) take out paper tray and open the cover that you can change toner cartridge there (see manual) looking for any paper inside paper input area or around the cartridge, then take out jam paper.
2) open fuser unit at paper output area ckick a locker at somewhere (see maanual) looking for any paper jam

change the printer settings on your ms office.

Here's a video that shows how to clear a jam on this printer.