Need to recover password westell 7500 - Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100)

poisnscorp

• 111 Answers
• Posted on Nov 15, 2009

SOURCE: i need help connecting a westell 7500

Westell makes a line of broadband home networking products that enable residential customers and users in small businesses to access and share broadband services. These inexpensive DSL router/modems offer multi-users Internet LAN access for home or business applications. The Westell router/modems allow you to have the benefits of the "always on" high-speed broadband Internet connection without losing the ability to receive voice calls over the same phone line.

1. Step 1 Connect one end of the Ethernet cable to the computer's Ethernet port. Connect the other end to the Ethernet port on the back of the Westell router.
   
2. Step 2 Connect the barrel end of the router's power cord to the connector labeled "12 v" on the back of the router. Plug the other end of the power cord into a wall outlet.
   
3. Step 3 Connect one end of the DSL phone cable to the DSL line jack on the back of the router. Connect the other end to the wall jack.
   
4. Step 4 Wait for the Ready and the Link LEDs to glow steady green. The router is now ready to use.
   

SOURCE: I have a westell 7500

I believe you type 192.168.1.1 into your browser's address bar, hit enter and you're there. Some say you have to use Internet Explorer (version 5.5 or later), not sure though.

SOURCE: need to hard reset westell 7500 modem to factory

• Note: Resetting your router to the factory defaults not only changes your router user name and password to the factory default values, but it also deletes all your home network settings. This includes the SSID and network encryption key. After you reset your router to the factory defaults, your home network won't be accessible until you reconfigure your router and all your network devices to use the same SSID and encryption key.

1. Hold the reset button on the back panel of the VersaLink 7500 gateway for 30 seconds.
   • All your settings will be lost including network encryption information and any SSID information you have entered.
   • The gateway user name and password will revert to the default of Admin as the user name and Password as the password.
   
   
   
   
   
2. Your VersaLink 7500 gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. You must re-configure your VersaLink gateway to match your previous settings that were assigned to all other devices on your wireless network. Otherwise, no other network devices will be recognized.

Doctor PC

• 7733 Answers
• Posted on Jan 07, 2012

SOURCE: I need the Security Key for Westell 7500

READ http://www.fixya.com/support/r7900574-general_router_setup