Time change on Pioneer car radio

Turn the raido/cd player off. Hit the clock button. Time will display. Press and hold down the audio button for 4 seconds. Use the arrow keys to change time. Press and hold the audio key when finished until the time is done flashing.

The manual for my Pioneer radio (DEH-2000MP) said to push the FUNCTION button but that did nothing. I needed to push the SOURCE/VOLUME button and hold it in until the hour started blinking, release the SOURCE button and then use the up and down arrows to change the hour. Use the right arrow to change the minutes (they'll start blinking.)

With radio off hit "Clock" key (should display time). Hold "Function (F)" key 4 seconds. Display should light up. Use "up" or "down" arrow to change time. Use "left" or "right" keys to switch from hours to minutes. Hit "Function (F)" key to exit.

If this doesn't work you might want to try setting your emergency brake as someone else has suggested.

Try turning the unit off then hold the off button till the clock flashes then use the remote function button to select between hour and minutes then hit the off button again shuold be good.

OK here's your fix...  go to http://www.pioneerelectronics.com/PUSA/Support. In the search window at the upper right of the page, search for your model (i.e. DEH 2700). That will lead you to a general page for your model. Click on the Documents tab on the page. There's your manual. RTFM.

Hold the audio button till the time shows; press the function button and the clock ill start blinking. Use the right - left arrows to chose hour or minutes. Use the up and down buttons to set the hours or minutes. Then press function again to go back to normal setting! Dang that was really hard to learn though!

Push and hold the volume dial, use the L-R keys to change Hour to minutes, Up-Down for numbers.

No way to know or get help unless you post the model number. Most of the time you need to turn the radio off and press set, mode or Prog, then push another button somewhere to get the hours or minutes to change.

How do I change the clock?

Have two pioneer radios in older hondas. Try this for the Pioneer keh-2600. Hold down clock button. Then press selection "1" for the hour until you get hour. Do the same for minutes, except press selection "2" button. Other than that, go to pioneer.com website for exact model. Thats where i got this idea from.

Instructions

1. • 1 Turn the ignition key to On or Accessory. Pull up the emergency brake.
     
   • 2 Press Source or Power to turn the Pioneer car stereo off.
     
   • 3 Press the Clock button to display the time.
     
   • 4 Press and hold the Function or Audio button for 3-4 seconds. The display will come on, and the hour should flash.
     
   • 5 Use the Up or Down buttons to change the hour setting on the stereo.
     
   • 6 Press the Left or Right keys to get to the minutes. When the minutes start to flash, press the Up or Down keys to set the clock to the correct minutes.
     
   • 7 Press the Function or Audio button again to exit.
     

It was the audio button on mine, NOT the function button, so solution #4 worked great for me.

I can't believe this worked. My son has a pioneer cd player in his truck. No one has ever been able to figure out how to change the time. I googled "how to change the time on my cd player clock" and this was the first site I clicked on to find information. I went out to the truck where he was just ready to pull away. We followed the instructions and it worked perfectly. Turned off the player, hit the time button, and then the audio button (there was no function button) and got the flashing hour number, changed that, moved over to the minute button and changed that, and hit "time" again, and it was working!
Thanks everyone for all your help.

It' not the audio button, it's the func button

Try turning the ignition key to On or Accessory. Turn the radio off. Press and hold the Function button for 3 seconds, and the hour should flash. Use the Up/Down keys to change the hour. Then press the Left/Right keys to get to minutes and when that flashes use the Up/Down keys to change minutes. Then press Function again to exit. Hope this works.