Proform Crosswalk 500 Treadmill Logo
A
Anonymous Posted on Jul 04, 2014
Answered

My treadmill turns on but completely cuts out and trips the house fuse box.. whats wrong

Answer This Question

1 Answer

ANTHONY MEREDITH

Level 1:

An expert who has achieved level 1.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 6 Answers
  • Posted on Oct 01, 2014
ANTHONY MEREDITH
Contributor
Level 1:

An expert who has achieved level 1.
Problem Solver:

An expert who has answered 5 questions.

Joined: Jan 08, 2011
Answers
6
Questions
0
Helped
3984
Points
6

Either your Motor or Motor Control Board(MCB) is faulty.
Try testing your Motor with a Drill Battery:
1. Disconnect the machine's power lead from the power socket, so that there is no power to the machine.
2. Open the Motor Hood.
3. Disconnect the Motor + and - leads from the Motor Control Board.
4. Connect + and - leads(normally Red and Black) to the Drill Battery.
The Motor should turn the Belt.
With the Motor leads disconnected from the MCB, you can connect the machine to the power, Press Start, and if this trips your Fuse Box you know its definitely the MCB.
Only carry out these tests if you are competent.
Lethal Voltages are present.
samsfitnesssolutions.co.uk

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Proform 9000 trips power as soon as we turn it on. Anyone else had this issue?
Unplug the treadmill from the surge suppressor and plug in a typical house vacuum.

Turn on vacuum. If breaker does not trip from the vacuum then treadmill power supply is likely kaput.

If breaker trips then likely it's not the treadmill. Bypass surge suppressor by plugging vacuum directly into same wall outlet as the suppressor. If breaker again trips, it's not the suppressor and more likely there is some type of circuit overload or other fault in the house branch circuit.
Read full answer
Oct 16, 2021 • Proform Exercise & Fitness
1helpful
1answer

GT40s treadmill. Why doesn't it turn on?
Your treadmill may not be turning on due to a broken or a failed power supply or a broken power cord or a tripped circuit breaker switch a failed circuit breaker switch a bad power switch or wiring failure or a bad motor control board or failed console display screen can stop the treadmill from turning on. If the outlet is not working try to reset the house circuit breaker which is located inside of the fuse box to restore power to the outlet.
Read full answer
Jan 06, 2021 • Reebok Exercise & Fitness
0helpful
1answer

I have a Livestrong treadmill model ls10.0t. A few seconds after turning on, the circuit breaker on the treadmill trips and it cuts off. Not the house circuit, but the treadmill circuit breaker
You have a bad motor control board. Call CircuitBoardRepair.net - They can help troubleshoot and repair your controller as needed.
Read full answer
Mar 23, 2018 • Exercise & Fitness
0helpful
1answer

How to fix treadmills JKEXER vigor 6090 broke down with smoke and fire ?
sounds like motor went bad tripped the breaker ! go to fuse box look for breaker that's not all the way on turn it off then back on that will get your power back on make sure you un plug treadmill
Read full answer
Sep 06, 2014 • Exercise & Fitness
0helpful
1answer

Kenmore Model 1.10 60902990 Dryer Problem
Try it with out connecting to your vent and see if it still trips,other wise your vent is still clogged. Also should be good air pushing out the disconnected vent, if not maybe blower wheel clogged.
Another thing is how hot is it getting.Maybe the operating thermostat is getting to hot and never stopping the heat when its supposed to.
Read full answer
Nov 07, 2013 • Kenmore Dryers
0helpful
1answer

My york treadmill keeps tripping all the electric in my house
1) Unplugged the treadmill, and test if the c. breaker from your house is tripped.
2) If continuos tripped the problem is your HOME, and NOT in the treadmill.
3) Connect the treadmill, if the treadmill NOW tripped the problem is Treadmil.
4) Test the power cord for cross wiring and repair, AVOID any extension cord for feed the treadmillL DO NOT USE.
5) See if the outlet box in your wall is o.k some wires touching between provoking short.
6) open the treadmill, and test the power button for short and replace, see if there are some wires touching the chassis of the treadmill and repair.
see the block diagram and troubleshooitng.
God bless you

6_29_2012_11_02_39_am.gif
Read full answer
Jun 28, 2012 • York Exercise & Fitness
1helpful
1answer

Healthrider s300i treadmill does not turn on
Check the fuses under the lower hood. One should be a 10 amp fues, the other should be 15 amp fuse.

Replace them if blown. If they should blow again, move the treadmil to an outlet closer to the fuse box/breaker box of the house. the house wiring where you have the treadmill may not be adequate for the treadmill.
Read full answer
Jan 24, 2012 • HEALTHRIDER Exercise & Fitness
0helpful
1answer

I have a Weslo Cadence M5 treadmill. When i used it, it tended to trip out the electrics when the treadmill was started, but worked when I put the trip switch back up again and tried again. However, it has...
hi, firstly change the fuse in the plug to a higher voltage, then if you are using an extention wire make sure all the wire is unrolled. i had the same problem with my m5. i was using an extention wire on a roll that was shorting out the trip on the treadmill and cutting the electric off. so just by putting a higher amp in the plug and i am now using a 2m extention alot safer and much better,
Read full answer
Nov 18, 2010 • Cadence Weslo 5.0A Treadmill Walking Belt
0helpful
1answer

When the machine is switch on from the main socket and than on from the machine on /off switch, it trip the whole house fuse box.I have change the 13amp.plug fuse, I cannot locate where the machine...
hi..It is next to the switch where you turn on.Open the
casing that stores the motor etc.Should be able to locate
it there,usually hidden inside a capsule.
check it out..
thank u..
kindly rate my response..
Read full answer
May 09, 2009 • Exercise & Fitness
0helpful
2answers

Treadmill trips electrics
Check to see that the treadmill does not draw more amp than stated in the owners manual. If you are, then the problem is in treadmill. If not try another circuit in the house (not just another receptacle).
Read full answer
Jan 09, 2009 • Proform 380 CS Treadmill !
Not finding what you are looking for?

View Most Popular

Crosswalk 500 Treadmill

  • Exercise & Fitness

Related Question

Proform 9000 trips power as soon as we turn it on. Anyone else had this issue?

  • Proform Exercise & Fitness

Related Topics

202 views

Ask a Question

Usually answered in minutes!

Popular Questions

I can't unfold my proform treadmill

Proform Exercise & Fitness

How do I move my Proform Treadmill to another room

Proform Crosswalk 500 Treadmill

Treadmill keeps inclining and declining

Proform ZT5 Treadmill

Problems with my pro form 540 treadmill

Proform Crosswalk 500 Treadmill

The incline on my proform treadmill is not working

Proform 650 Crosstrainer Treadmill

Best Treadmill
Best Treadmill

View all Fixya Reports

Top Proform Exercise & Fitness Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

john h

Level 3 Expert

29494 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...