How to fix error "ChainLink = 123-314" on a Xerox 6204?

this is the error to stuck the machine like my machine was stuck and i solve from here quickbooks error 6000 83"}" data-sheets-userformat="{"2":8705,"3":{"1":0},"12":0,"16":12}" style="color: rgb(0, 0, 0); font-size: 12pt; font-family: Arial;">quickbooks error 6000 83

You can fix Fault code 004-346 on Xerox 7346 by following these steps:

1. Make sure all shipping restraints
2. Run the Belt Edge Learn Test from the diagnostics
3. Reseat the Accumulator Belt
4. Did the error clear?
5. If not replace the Accumulator Belt 6.If the error still continues replace the Engine Control Board

For the more detail visit the link:
https://www.orionmarket.com/product_error/14541/Xerox/Phaser-7760/xerox-7760-error-code-004-346

Possible fixes:

http://www.fixya.com/support/t25730597-sln_xerox_wc_5330_error_code_092_315

http://www.fixya.com/support/t26120953-fix_error_code_092_315_xerox_7225

http://www.copytechnet.com/forums/xerox/125397-xerox-iv2263n-error-092-315-a.html

https://www.yoreparo.com/en/5769533/i-have-code-092-315-in-xerox-5325-how-can-i-remove-it

https://forum.support.xerox.com/t5/Hardware/Xerox-6204-Wide-Format-Pringer-External-Device-Error-Chain-Link/td-p/229212

This might help you

I am afraid you will have to call out a xerox service tech, he will have to reinstall the M\C siftware.

"external device error" chain link 116-311 for xerox 6204 machine how to solve the proplem

Xerox wide format 6204 error 123-314

Try these Links.

1. http://www.retrevo.com/support/Xerox-6204-Multifunction-Printers-manual/id/8117bh747/t/2/

2. http://www.support.xerox.com/support/xerox-6204/downloads/enus.html

reset ur fuser module
press 0 and hold for 5 second than press start button
enter passcode 6789 and press confirm
press machine status and press tools on touch screen
press maintenance and diagnostics
nvm read /write
type chainlink 744-220
enter new value 0 and save
after close the log
restart ur machine

The cutter assy has a disk with hole in it to tell the circuit board how fast it is turning and where it is in respect to the home position. It may be that this disk or the sensor that looks through it has a lot of paper dust on it and not able to read correctly. It may me the the cutter itself is sticking and needs a little cleaning and oiling.