Blue light on panel, what does it mean? - Pride Go-Go Elite Traveller Plus HD Mobility Scooter (Pride®)

Flashing blue light means it is working!
solid blue light means it is not working!
no light means its not on!

If you mean the blue color spectrum isn't there and you are using component cables, check both ends of the blue connections to make sure they are pushed all the way in.

It is on protection mode due to some defects on the board. Switch off the TV manually, remove the plug and cool it off for 48 hours and retry. If nothing works, better refer it to a qualified service technician.

If you mean the red light is displaying offset from the blue and green then the red LCD panel inside the projector needs to be physically adjusted. If you take the projector apart you'll notice that the light source is split into red, green and blue light by passing through an optical splitter. Each color then passes through it's own LCD panel. Next, each color is joined back together by another light splitter to be projected to your screen. The red LCD panel is misaligned.

there is a button at the top of the touch pad with a light to the left, blue means its unlocked, orange means its unlocked. try the button to swap between states

bottom left lights. when i turn on tv red light flashes what does mean

If what you mean is that the blue screen won't turn off (after about 5 minutes), so you should go the your tv menu options and select how much time in the blue screen option (under 'picture' or something like that).

Long story short: The blue fog problse is the light engine. Specificaly, the filter for the blue LCD gets to hot and over time starts to burn up and disinigrate. (I just tore my set apart thinking maybe it was the blue panel and found this was indeed the culprit for this problem). As far as a solution? You will either need to replace the light engine (expensive) or replace the light filter which means tearing the thing completely apart. then there is the problem of where to get a replacement filter. Does ANYONE know where? As far as the lamp goes, might be time to replace it. You might be better off just getting rid of that TV and get a new one.

with my satellite, i had to charge it before it was operational.
if its charged, look on the front panel, is the battery light red, or blue.
red means its dead.
blue means its fully charged