Lw4203w2 Trying to replace belt on a Amana LW4203W2. The belt has broke into.

If it's a front loader, check the bearing, they wear out.

belt routings

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

This will help:



If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

give model number

well if hte washer belt is "burning off"" that tells me the motor is trying to spin at full speed buthte transmision pulley is holding it back, can be a few issues, either the brake is notreleasing correctly or, the transmission is locking up .

Put The Belt On The Motor First Then Put What You Can Get Of The Belt On The Other Pulley And Turn It. It Will Give You The Anchorage Needed To Put The Belt Back In Position. If This Doesn't Help Let Me Know And I Will Further Assist You.
Sincerely,
Michael Scott

1. unplug dryer
2. popoff the top off
3. take front off (unscrew)
now you can get access to the belt look in bottom of dryer there is a giude wheel for the belt
4. place belt around drum and pulley make sure you add tenstion
5. replace front and top

Thank you for useing Fixya

instructions on how to change belt

make sure you have the right belt because there are 2 belts for the machines if your motor mounts to the tub or if it mounts to the bottom of the washer and make sure the belt is on the tensioner

Sorry RickAZ, I have just joined the fixya family. I'm trying to get old unsolved problems off the list, so I'm just posting a fix. Congratulations on your replacement washer.