MLX-28D Corded Phone Change Time

This will need to be done from teh MLX-20L ONLY.

Time and Date in Merlin Mail

A label can have a maximum of seven characters.
To administer Labels for Extensions from the System Programming console:

1. Press Menu.
2. Press System Program.
3. Press Exit or Start.
4. Press More or Right Arrow Key.
5. Press Labeling.
6. Press Directory.
7. Press Extension.
8. Dial the extension number that you want to administer.
9. Press Enter.
10. Press Drop.
11. Enter the label information for the extension number selected.
12. Press Enter.
13. Press Exit or Back.
14. Press Home or Exit to exit programming mode.

Note: When programming on the system programming console, use the buttons next to the display to specify the letters A through I and punctuation. Use the line/feature buttons to specify additional alphanumeric characters for labels. Use the template provided with the System Programming console to see which line buttons correspond to which alphanumeric characters,

From the system programming menu either in the pc programming tool or from the console phone enter into system programming, options,more, group coverage delay. set here from 1 ring to 9. Good luck.

If this was helpful please send me a rating.
Thanks Dan

This will need to be done at Extension 10 or 11.

Press Feature 00
Press LEFT intercom, LEFT intercom
Press right intercom. Display will ask for an extension number.
Enter the extension number you want to modify.
Now it should say "program ExtXX"
Press * * (STAR STAR)
then touch the lines in the order you want to pick them up, when finished entering the order....
PRESS * * (STAR STAR)
Then Press Feature 00 to exit programming.

or, if this is a Magix, the 4424ld+

I assume you are also using a Merlin Voice Mail? Once the message has been deleted there is not way to retrieve it.

I assume you got this fixed? But, Euro style is a Partner phone, and Merlin is a merlin...contradictory terms.

You can not log caller ID information on the Legend phone system

When you switch phones the system does not know this. All programming is stored in the system, not the phones. If you swap phones of the same model nothing should change. If you put a phone in with different button configurations then things very well may change.

It's not an easy fix. The phone system would need to be re-programmed for that phone port.

You can do a self test by pressing buttons in this order: Intercom, speaker, *, 0, 0 The phone will make noise and all the lights will flash. If all the lights are working in self test but no in normal operation, then it's probably a programming issue. Have you had any other problems or mysterious changes in the system? Possibly after a power outage or lightning storm??