How do I reset scanner frequency I don't have a about reset button on the back of my bc60xlt-1

Trying to program codes in old scanner - The RadioReference.com Forums

forums.radioreference.com > ... > New User / Getting Started Forum

Jun 1, 2009 - 4 posts
I have an old Uniden Bearcat model:bc60xlt-1. I just created an account on radioreference and hopefully you guys can help me out, the ... uniden barcat bc60xlt
7 posts
Mar 17, 2013
The Betty Bearcat starter frequency guide?
3 posts
Feb 22, 2009
Analog Police/Fire Frequencies
9 posts
Sep 14, 2007
Uniden Bearcat BC60XLT-1
10 posts
Dec 18, 2004
More results from forums.radioreference.com

UNIDEN BC60XLT-1 USER MANUAL Pdf Download.

www.manualslib.com > Brands > Uniden Manuals > Radio > BC60XLT-1

Hit Manual first, then type in Frequency, then press Enter

how do you program a bc60xlt scanner, and how do you reset it i have tried 2,9 manual but nothing i have the battery out and see if that work but how long do i leave them out.thanks

Don't waste your money on a publication that's out of date before it's printed. For a comprehensive database of active frequencies and systems in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B.
Listening in since the 60's

You listed your question under the BC60XLT, which is a 10-channel scanner. With 30 channels, I'm guessing that yours is actually a BC60XLT-1. To program a known frequency into it:

- Power the scanner ON.
- Press MANUAL.
- Enter the channel number that you wish to program.
- Press MANUAL again. (NOTE: Instead of entering the channel number, you can press MANUAL repeatedly to advance to the desired channel.)
- Enter the frequency, including the decimal point.
- Press E to store the information in memory.
- Repeat the above for other channels.

More detailed information can be found in the scanner operating manual, which you can download/print here:

http://www.uniden.com/pdf/BC60XLT-1om.pdf

If your scanner is a different model, pleasd let me know.

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

This is a pretty straightforward scanner with 30 channels. To program it, turn the scanner ON, press the MANUAL button to stop scanning, and then use MANUAL to advance to the desired channel. Enter your desired frequency, including the decimal point, and then press E (Enter). Use the MANUAL button to advance to the next channel, and then proceed as above.

For complete information on your scanner, here's a link to the owners manual:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

For a comprehensive database of active frequencies in your area, visit
www.RadioReference.com
or
www.CityFreq.com

There is no master reset/clear function on this scanner, but with only 10 channels it's fairly simple to enter "0.0E" on each channel to clear the programmed frequency.

The BC60XLT does not have a global search feature. In fact, this simple scanner has no search feature of any kind. Reception is limited to 10 user-programmable frequencies and 7 factory-programmed NOAA weather frequencies. If you need a manual for your scanner you can download it here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Here's the link for your manual It's 3.71mb http://www.uniden.com/pdf/BC60XLT-1om.pdf . The manual is written for "People" not "engineers" If you still have problems, post a reply and I can help further. Hope this helps

Channels have to be programmed with a frequency before the scanner will allow them to be unlocked. The L/O indicator should automatically turn off once a frequency is in memory.