Nook cable doesn't fully insert into port for connecton?

Yes

You will need to "reboot"
While pressing down the Nook button (upside down u on the front of the tablet), press the power button on the side. You will need to hold it for couple of seconds.

It may be your cable, I jsut had to replace mine and I had it under a year, the Nook is known to have troubles with the cable. See if your Nook is still under warranty and call customer service, if not, you may have to buy a new one.

How to Reset Nook


6 different ways to do resets on nook. Try them all first.

Semper Fi,
Z

my nook tablet shows the green light that it's fully charged but when trying to turn it on nothing happens the screen does not com on or the nook symbol does not light up . can any one help me out here

Cord that plugs into Nook may be loose in port and not making a good connection. You may even want to try a different USB cord.

It could be your cable, Nook is know to have faulty charging cables, you may have to buy a new one. If you do, here is a tip, search for a pen that you have to click the top to use it, take it apart and take out the spring, now wrap the spring carefully around the charging cord starting at the end where you plug it into the Nook, I attached a photo. This keeps the cord from bending and cracking the wires inside the cable

TRY a hard reset on the Nook if that doesn't work i know of this fantastic site BNTPrice.com that sells them for cheap. i hope this works for you

1. Press the "n" button to display the quick nav bar.
   

2. In the quick nav bar, tap the Settings icon.
   

3. In the Device Settings section, tap Device Info.
   

4. Tap Erase & Deregister Device.
   

5. Stop. Think. Think again.
   

6. If you really, really want to do this, go to Step 7. If not, tap the Back button.
   

7. Tap the Erase & Deregister Device button.
   

you can use a debit card