Error code 66

Give more details of the error codes.
and when you get the error itself.


shown on page 66

ftp://ftp.tcsn.net/toshiba%20estudio%20120-150/e-STUDIO120-150_SM_EN_001_este.pdf Toshiba studio120 Service Manual

http://www.registryquick.net/runtime/Fix-Runtime-error-66-How-to-Fix-Runtime-error-66-95318.html

Error code '66' is a rare case. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Error codes, and LED blinking codes to many popular brand remote controls are given.

I fixed it! I had a working set up. I synced my iPod touch and update the software, then hooked it back upto my car stereo. I received error code 02-66. I disconnected the iPod and cable from the radio. Turned off the radio restarted the iPod. Turned radio back on with main menu displaying on iPod I hooked it back up to the Pioneer radio. Vuala! It works. Hope this helps.

you might want to unplug the set and plug it back, my list does not show a code or error code 66 for this set. Power it up and let it fail and check for the error, if the wrong model was posted here that may be the reason.

No such error code that I can find, try to unplug and let it fail again, then do the check again.

66. (01000001) Pressure Transducer Error [Ptx Frequency > 90 kHz]
Note: this supersedes Fault code 65 from V41 Motor controller code onwards.
The Motor Control module has received signals from the water level sensor (Ptx)
above normal frequency values.
Primary Source: Motor Control module
Action: Replace Motor Control module

I took this from the service repair manual. Hope it helps.

HI error code 66 means you have a pressure transducer out of range error.This means that the control module is faulty and needs replacing.please confirm that the error code is numbered 66. On some machines the pressure switch is seperated and sometimes the plastic tub for the switch gets clogged up and blowing through it will sometims clear this fault. Not sure about this particular machine, but you can try adjusting water level to see if it will work at a different level of water.

HI error code 66 means you have a pressure transducer out of range error.This means that the control module is faulty and needs replacing.please confirm that the error code is numbered 66.Please reply for further help and clarification of this fault code.Hope this helps.

fatal error occurred, restarting