When trying to pair my Plantronics 220 to my Blackberry I'm prompted to enter the pass code for the Plantrinics device. I have no idea what the pass code is. I bought it new and never changed it. It pairs with my LG envy every time. I'm a novice with the Blackberry

The pass code for the Plantronics bluetooth headsets have been 0000 (four zeros) for as long as I can remember. Make sure there is no interference from another bluetooth device and follow these instructions with the attached link for the Plantronics Explorer 220.

Here is the link for the instructions for the Plantronics Explorer 220.

Good luck from Headsets Direct!

Pairing the Plantronics Explorer 220:

For most phones, select Settings/Tools, Connections, Bluetooth, On. See your phone's user guide for more information.

With the 220 headset powered off, turn on the headset by pressing and holding the call control button for approximately 5 seconds until the LED flashes red & blue. The Explorer 220 headset is now in pairing mode. If you don't see the red/blue flash, press and hold the power button to turn your headset off, and then press and hold the power button again and hold for 5-6 seconds until you see the red & blue flash.

From your phone, go to the Bluetooth menu and select "Search" or "Add Device". Your phone should find the headset which will appear as "2xxPlantronics" in your list of devices.

If prompted for the Passkey (PIN code), enter 0000. If your phone asks for a PIN/passkey, enter 0000 (4 zeros). Pairing is successful when the LED on your headset flashes blue. Your headset is now connected and ready to use.

Here is the link below for step by step instructions.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headset Direct - 800-914-7996.

The default pass code is "0000."
Here's how to pair it with the default pass code:

1. Turn the Bluetooth on and hold down the button until the light turns solid.
2. Put the phone in discovery mode or search for a Bluetooth device.
3. Pair the Bluetooth to the phone and enter the pass code "0000"

To find the User's Guide, check here: http://www.plantronics.com/us/support/docs/index.jsp?prodId=prod5920006
On Page 4 and 5 it details how to Pair the Bluetooth device to your phone.
For an Android 2.2 phone:

1. Turn Bluetooth Headset on according to instructions in the Users Manual
2. On phone, Go to Applications --> Settings--> Wireless and Network --> Bluetooth Settings
3. From this menu you can turn Bluetooth on and once its on you can choose to Scan Devices
4. Select your headset from the list.
5. You will be prompted to enter a PIN or Code. By default it is 0000 (4-zeros)
6. You devices should now be paired.

Hope this helps.

Shut your Explorer 220 off. Shut your phone off and take the battery out for about 30 seconds. Put the battery back in and turn your phone and headset back on and try re-pairing them. This should take care of the problem for you.

Here is a link to the Plantronics Explorer User's Guide.

Good luck from Headsets Direct!

Hi there,

Well the default pass key for most of the headset's is 0000 so you can try this .........

Good Luck!!
Thanks for using FixYa!!

my Plantronics 233 never asked me for code either...it just connected. The code will be 0000 either way.

you should try 0000 it worked for me

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

Hold down round button on earbud for 5-6 seconds until the lights blink alternating red and blue.....then, enable your phone/device to connect in pairing mode. This will be a "find device" command or something similar. Once they recognize each other....it will send you a screen to enter a code. This will be 0000.....enter that...and once they pair...you are good to go.