Universal webcam driver

1st You download Webcam Driver.
XGR YWB-1016 I need the
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

sounds like the pixal settings are to high on your computer reset them to a smaller size and that should fix it

Try reinstalling the drivers for your webcam and see if that helps.

You have to install the vga drivers to fix your problem.

http://rapidshare.com/files/261353719/200902131410_Sonix_USB_Video_Device_V001_v1.0.1.101.exe

www.techsolutionspot.com

• The XGR drivers are available here
• http://www.comstarsa.co.za/Comstar/Doawnloads/Index_Frameset.html
• Index of files http://www.comstarsa.co.za/tmp/

But I cant get the link to work - a direct link to the file is

• http://www.comstarsa.co.za/tmp/xgrwebcam.rarBut NOT 100% certain its your model or OS - SMI Standard Driver
• same driver here http://www.comstarsa.co.za/tmp/cam.zip

Theres also a Webcam zip file - which the source of the download page refers to http://www.comstarsa.co.za/tmp/webcam.zip - which opens a file called USBPCCAMPLUS - is this the name of your device at all?

Go to the Sabrent website you can download the necessary drivers http://sabrent.com/#itemName=&itemID=0&section=Drivers

Download Cam Driver From this site.

• Webcam Drivers

You may have to tell your computer what mic you wish to use ( make it default )
Typical audio set up

Laptop/mic x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Hi Guys I had the same problem, a bunch of idiots seem to be running that show.

goto to this instead : www.comstarsa.co.za\tmp

This is a ftp site with a list of the drivers - hope this helps :)