What to do ce-02 netzwerkfehler sharp ar-m 207

SOURCE: F2-02 error on Sharp AR-M237

on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...

SOURCE: Network Error code CE-02

the ce-02 code is just a communication error it general in nature so you could have a couple different issues going on

SOURCE: SHARP AR 5020 error F5-02

you reset your eror code program c#0#

SOURCE: sharp arm 450n (ce-02)

1) If you're actually scanning to an email address, make sure your SMTP email server information in the copier's web page is correct.

If you are using names instead of IP addresses, also make sure your DNS server IP's are correct.

2) If you're scanning to create the fake email set up by Sharp Network Scanner tool, the connection info in your copier is old and needs to be refreshed.

From the computer you're trying to scan to, right click on the Network Scanner Tool icon in the tray, go to Automatic Profile Update, and select Update Now. If you have no tray icon, reboot your computer.

If your copier is set up to store names instead of IP addresses, make sure your DNS information is correct in the web page.

SOURCE: CODE L4-02 JUST ILUMINATE ON MY SHARP AR-M 350U PHOTOCOPIER

That code means you have a drum drive motor failure. The drum is the long, cylindrical green-blue tube you'll see when you open the left-side door.

Chances are some paper jammed up inside the drum process unit (that black frame that holds the drum) and it's keeping the drum from turning. Check the drum/process unit and make sure they are clear of any material that could cause a jam.