Where is the reset button - Kenmore 62622 Microwave Oven

Sometimes the reason for the start button on your microwave not working ... But first, try holding the off/clear button on the keypad for 5 seconds for a soft reset.

press clock button reset the reset button

press start button twice it sounds as if it is still in child lock mode

The owner's manual is here. Be sure you have the clock set correctly.

You can also try a hard reset by unplugging the oven for a couple of minutes, plugging it back in, resetting the clock, and trying again.

Hi,

Press the "Off/Clear' button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started. Press it when the cooking complete reminder appears on the display.
Perform a hard reset. Pull the plug out of the wall power supply, and wait a moment. Plug the GE microwave back into the wall power supply to reset any anomalies with the microwave's memory. You will need to reset the time of day if you perform a hard reset.
Reset the time of day. Press the "Clock" button, and turn the dial to set the hours. Press the dial to enter. Follow the same procedure for the minutes and a.m. or p.m. Press the "Start" button to start the clock.

Check to see if you have a "reset" button on your microwave, or even just by pressing the "clear" button first. Check to see if you have a "master" or "red" reset or "test" button nearest to your microwave on a light switch and reset that if applicable. You could also check to see if your unit has a fuse and replace that. It's possible when you tripped the fuse in the house you might have blown the fuse in the microwave.

if u take the back off there are to thermostats on the top of the element housing one has a hole in the back of it push a pin in the hole till u hear a click and u are good to go :)

Been resolved?

You need to replace the control pad.

You find parts and diagrams here.