The problem is with the TV not the input as the problem persiste regardless of the input source.The problem is with the TV not the input as the problem persiste regardless of the input source.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are a few things you can attempt to fix your Bush VL19HDLED TV if it is showing a poor image:
Verify the picture settings: Inappropriate picture settings could be the root of the undesirable picture effect.
Verify that the picture mode is set to "Standard" or "Normal" in the TV's settings menu.
Furthermore, make sure "Picture Invert" and "Negative Picture" are off by checking the options.
Try resetting the TV to its factory preset settings.
You must consult the user handbook to accomplish this because different models reset in various ways.
Verify the connections.
Verify that every wire leading from your TV to any connected external devices (such a cable box, DVD player, or game console) is securely fastened and operating as intended.
Contact a repairman:
If none of the aforementioned fixes work, there might be a hardware problem with the TV.
In this case, it may be necessary to contact a repair technician for further assistance.
The Bush VL19HDLED TV is a rather ancient model, thus it could be challenging to get replacement parts or help for repairs.
It can be more cost-effective to replace the TV if troubleshooting is unsuccessful in fixing the problem.
Check connections in rear of television if connections are good check condition of RCA jacks and other connectors.Lots of times poor sound and vision quality is due to cheap or damaged connectors and/or wireing.
Its possiable that you may have poor solder connections where our STK ICs are resolder them and transistors they are big black ICs will have STK392-110 on them. I would First start out with soldering everything on convergence Board.
The sony tuners have been known to get intermittent, it might be a bad ground where the tuner connects to the main chasis, If the problem is in the tuner itself it will be most difficult to resolve since the connections are so small and compacted together.
Good luck
Check for multiple poor solder connection on the sweep/power supply board.
or. just need to balance the three colors red,green and blue that may help. remove the front covers and look for black module that have screw and focus controls just move little bit left or rightbe carefull because you can loose the picture.
This is no easy fix problem you need to take set to repair shop, this is a lot of problems with these sets cold solder ,poor connections,bad deflection boards, tuner boards, bad ribbon connectors etc etc ect......BAD Flyback Transformers.Normaly id say your hori out put was shorted but on these sets anything can happen. ThankYou for using FixYa. Have a NIce Day.
The problem is with the TV not the input as the problem persiste regardless of the input source.
×