What is the part # for Car Power Source for a Audiovox D7200MB

The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.

to hook up a audiovox dvd(pav1510dtv)
red ignition
yellow battery
black ground
d blue power antenna
pink parking brake(or ground)

speakers]
grey
grey black FR

white
white/black LF

Voliet
voilet/back RR

green
green/black LR

HOPE THATS HELPS

You will to buy a fuse with a higher amp rating

You can buy a new car adapter by clicking on the hyperlink:
buy replacement car adapter power charger cord for Audiovox PVS72901

http://audio.manualsonline.com/manuals/mfg/audiovox/audiovox_stereo_amplifier_product_list.html

enter in product model number and info

You can buy a new car adapter by clicking on the hyperlink:
buy replacement car adapter power charger cord for Audiovox PVS72901

the power supply amperes might be too low try using car batt as your power source

I'm sure Radio Shack can help you out in finding an adequate replacement otherwise there are many online stores that can sell you parts cheaper if you have the part numbers. Just do a simple search on google. Radio shack or any electronics store would probably the easier option. let me know if you need any thing else

my best to you

These aren't really made for offroad dvd watching. I dont think replaceing the lens would help at all. The dvd is very intence in data, theres alot of data there and skipping can happen easyly when bumps on road etc.

WHAT TYPE OF VIDEO SOURCE ARE YOU USING

There are 5 wires to connect to the BA-200 for proper operation. 1. Red Wire with Fuse: Connect this wire to a source of + 12 volts which does not turn off with the ignition key. It may also be connected directly to the po~itive (+) terminal of the battery. 2. Black Wire: Secure this wire using a screw or bolt on a grounded metal surface of the vehicle. Clean-away any rust, dirt, or paint from the surface to make sure a good connection is made. 3. Blue Wire: This wire activates the BA-200 when the stereo system is turned on. Connect it to the "Power .Antenna" lead from your car stereo. If your car stereo does not have or you cannot locate the Power Antenna lead, the blue wire can be connected to a source of + 12 volts which is turned on and off with the ignition switch. In this case, the BA-200 will be activated whenever the ignition switch is turned on, whether the car stereo is on or off. 4. Green Wire: Splice this wire to the wire going to the positive (+) terminal (sometimes indicated bya red dot) of the left speaker of your stereo system. 5. G ray Wire: Splice this wire to the wire going to the positive ( + ) terminal (sometimes indicated bya red dot) of the right speaker of your stereo system. You Need to order this piece trough the manufacturer, with out this piece the sub is useless, i am guessing around $20-$30 for it