How do I get my mah6700 washer to drain - Maytag Neptune MAH6700A Front Load Washer

E3 error code means that the Machine Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.

Troubleshooting the "E3" error code in Maytag MAH6700, MAH8700, and MAH9700 washers ' Fixitnow.com Samurai Appliance Repair Man

https://www.youtube.com/watch?v=rM1t0wXQriw

https://fixitnow.com/wp/2011/02/20/troubleshooting-the-e3-error-code-in-maytag-mah6700-mah8700-and-mah9700-washers/

Follow the link for answers to this fault code Troubleshooting the E3 error code in Maytag MAH6700 MAH8700 and MAH9700...

Troubleshooting the "E3" error code in Maytag MAH6700 ...

fixitnow.com/.../troubleshooting-the-e3-error-code-in-maytag-mah6700-...

Feb 20, 2011 - These codes in your (made-by-Samsung) Maytag washer might pop up during the ... In fact, the E3 error code means that the Machine Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.... MAH6700 and MAH8700 models (they use the same motor).

I have a samsung frontload washing machine. A code E3 is ...

www.shopyourway.com > Denise LaGrasse > Questions

Mar 15, 2014 - My samsung front loader is not working. do not no what E3 means. ...code F26 mean on a Kenmore Elite model 110.4708 washing machine?

How To Fix 3E Error Code On A Samsung Washing Machine

www.appliancerepairlesson.com/.../how-to-fix-3e-error-code-on-a-samsu...

May 15, 2015 - Samsung uses the 3E error code to indicate a drive motor tach fault. ...If you're handy, you can fix your Samsung front load washing machine error code ....My samsung frontload washer shows e3 and the drum does not turn ...

CLOGGED WATER PUMP HINDERING DRAIN AND SPIN CYCLE

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5174143

i have maytag neptune mah6700 and dosent rince good in the end of each wash the cloths steell to mutch water in the cloths dosent rince it good i thing the speed of the spin not that strong and the motor its very good but i thing is someone played with the fron the code and i dont have the manual to check those code

here is a website you can view a bulletin on the error code DC pertaining to your washer

http://fixitnow.com/wp/2009/06/11/e3-and-dc-error-codes-in-maytag-mah6700-8700-and-9700-washing-machines/

try to blow through the pressure switch hose back into the tub and if you have a piece of same size hose when you disconnect the tube to blow through it use you spare hose connect to the pressure switch and blow lightly do you here a light clicking when you blow into it if not pressure switch is more than likely failed when you done tested air restrictions ........RECONNECT THE TUBE TO THE PRESSURE SWITCH.....

have you check the pipes to the pressure switch and most have a small venturi in the pressure switch have you replaced that