Sharp AL 1631 Copier Logo

Related Topics:

A
Anonymous Posted on Jun 12, 2014

Reset sharp ar 203 - Sharp AL 1631 Copier

5 Related Answers

Adorjani Laszlo

  • 1316 Answers
  • Posted on Sep 01, 2009

SOURCE: SHARP AR-203 copier unusable after refill

Change the unit chip or reset him.

Ad

Anonymous

  • 32 Answers
  • Posted on Apr 17, 2010

SOURCE: Office Equipment Copier Sharp AR-153E need to

Have you done simulation 24-7 to reset the drum? Do SIM 24-7 and the unit will start to copy

Anonymous

  • 3 Answers
  • Posted on May 18, 2010

SOURCE: IS there a reset code for a Sharp AR-507 copier,

enter simulation: pound, interrupt, clear, interrupt, then enter 14, press start,press execute on touch screen, press ca until copier restarts, this is a general clear code, if problem returns you will have a heat problem in the fuser.

Cogz

Chris Coughlin

  • 1326 Answers
  • Posted on Jan 14, 2013

SOURCE: Sharp AR 5316 Maching Toner LED Light 3 Min. Blinking, and them start. Please Toner Curm reseting code.

Have you tried to replace the toner???? Are you sure the light that is blinking for the toner?????

Anonymous

  • 1 Answer
  • Posted on Apr 18, 2013

SOURCE: sharp ar 5516 maintenance reset

sharp ar 5516 showing ( - - - ) what's the solution

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Total counter reset program for sharp ar 5618

Can not be done. people then would reset the counters on old machines and sell them as new

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

107helpful
10answers

Sharp ar 5516 maintenance reset

sharp ar 5516 showing ( - - - ) what's the solution
9helpful
1answer

Installer of sharp AR-203E copier, scanner, printer

Hi,
You can download driver software for your sharp AR-203 from here http://sharp-ar-203e-series-mfp-driver.software.informer.com/download/ Hope this helps,
Please rate if this solution was helpful, thanks!
1helpful
1answer
46helpful
8answers

SHARP AR-5316 MAINTENACE RESET

To reset maintenance codes requires going into service mode. This should only be done by an authorized trained technician as changing or adjusting something in this mode could create all sorts of problems you dont want to deal with.
15helpful
4answers

Sharp AR-5127 H2-00 code reset

Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.
Not finding what you are looking for?

163 views

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...