Objective/lens error casio ex-z77

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ... Unfortunately, many cameras that fall prey to this can only be corrected by professional repair. But, here are some things that you can do that may correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty, they're worth a try.

i want help you but the casio say right to you. the proble is that the sand is go into the lens block.. you can make this.. if you have a friend that have a little eletronic knowledge.... its possible to find the entire lens...on ebay international seller... write on ebay.
lcd casio ex z77
look here on this link
http://cgi.ebay.it/GENUINE-CASIO-EXILIM-EX-Z77-GOOD-LENS-FOR-PARTS-/180536724405?cmd=ViewItem&pt=Digital_Camera_Accessories&hash=item2a08d3cbb5
you have ont his link the lens for your camera the cost is 36 us dollars complet with shipment... so if you look now on you tube and write..
(casio objektiv umtauchen) you can see exactly how you have to do to replace your lens. i am sorry that i am italian if you was here i can help you better, but i hope to have help you sorry for my bad english

what happen if my exilim camera lense is stuck in the camera

This is probably THE most common failure among digital cameras.
There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

you might have pushed the lens into the barrel. small lens barrel has 3 metal pins that ride inside the larger lens barrel as it twists. Pushing it sometimes cracks the plastic holding these 3 pins in. one way to fix it is to carefully disassemble the entire lens barrel. be careful...sometimes a part just snaps, or is already snapped. The easiest way would be to replace the lens assembly with a good one you can get from another camera like this. There are no spare parts for cams like this so you can try to get another cam that has a different damage other than the lens barrel.

This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

I did the same exact thing a couple of months ago. All i did was wiggled it around and then I pushed it back in place.

Hey Joy_2008,
A lens error usually means something is obstructing the movement of the lens (i.e. sand). You could try blowing compressed air into the side of the lens to try and dislodge whatever is stuck in the lens. You could also try placing the camera on a flat surface with the lens pointed up. While holding the shutter button in turn on the camera. What this sometimes does is force the lens to move before the camera shuts down, and when the lens moves hopefully it will dislodge whatever is stuck. If none of this works I would have the camera looked at by an authorized service technician. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.