Bosch 24 in. SHU43 Built-in Dishwasher Logo
Posted on Nov 05, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Bosch SHU3036UC not filling with water

I noticed my Bosch 3036 dishwasher was still on much longer than usual run cycle. When I opened the door I noticed it didn't fill with water and the detergent didn't release. Power is on to the unit but for some reason water is not coming in. Tried to call the Bosch service line and they keep me on hold for hours. I should say their "lack of service" line.

Answer This Question
  • Anonymous Mar 23, 2014

    will not fill with water

  • Anonymous Mar 24, 2014

    no water

×

2 Answers

dumbgames

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert 109 Answers
  • Posted on Dec 15, 2007
dumbgames
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

Joined: Aug 19, 2007
Answers
109
Questions
0
Helped
29341
Points
277

U need more info first what happens when u shut the door and start a cycle

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 23, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 23, 2007
Answers
1
Questions
0
Helped
525
Points
1

Check the hose! I just cut a check to a nice plumber who fixed our problem in an embarassingly short amount of time. The hose going from our dishwasher to the plumbing has a 2-inch or so silver part at the plumbing end with an internal switch that helps prevent flooding. Somehow that got tripped and suddenly we had no water for the dishwasher. The plumber turned off the water for the dishwasher, reset the hose, reconnected it and he was off to the bank in no time.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Service manual
Hello, I have a Bosch dishwasher model shu3036uc/12. Runs but does not fill with water. I replaced the water inlet valve and still does not fill. Water supply has been checked and looks good.
Read full answer
Jan 18, 2014 • Bosch SHU3036UC Dishwasher
0helpful
1answer

I have a Bosch SHU3036UC dishwasher. While sitting idle - during the day or over night, it fills up with fresh water. I shut off the water supply last night and this morning it was dry. Any ideas?
Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101
Read full answer
Apr 12, 2011 • Bosch SHU3036UC Dishwasher
5helpful
1answer

Bosch shu3036uc gets stuck during cycles.
Hello,

Welcome to FixYa.

Based on your description " bosch shu3036uc gets stuck during cycles "

I suspect the thermostat isn't satisfied when heating the water, hence it get`s hung up trying to heat in the part`s of the cycle it`s called for.

It very well could be caused by a faulty flow switch, NTC or heater as well but not very likely.

The dishwashers made by Bosch with a rotary dial timer have very few if any, issues with the actual timer or element but they do with the thermostat within the door panel.

If it ( the thermostat ) is not satisfied the water may heat but not be indicated via the thermostat, hence timer will not advance.

Here`s what you can try. If you have any hesitation or reluctance to service this yourself please call in an authorized B/S/H/ ( Bosch/Thermador/Gaggenau ) appliance technician.

**Turn off the breaker at the service panel before attempting any service suggested **

  1. You will require a #20 torx screwdriver to remove the door panel by taking out the screws around the panel, except the ones along the top ( watch the edges they are very sharp )

  2. Once the panel is removed you should see the thermostat over by the detergent dispenser clipped to the inner door, remove it and test it. You`ll need a ohm meter/multi-meter plus a lighter or match to heat it up to see if it open`s & closes.
Example...

5e74230.jpg
**NOTE** it can occur the thermostat can become loose and detach from the bracket which holds it in place, this too can manifest in the sysmptom of the timer not advancing.


Let me know how you make out and what you find.

Thank you for choosing FixYa and Good luck.

Regards,

Macmarkus :)
Read full answer
Oct 31, 2010 • Bosch SHU3036UC Dishwasher
0helpful
1answer

Bosch SHU3036UC/U11 dishwasher does not stop filling with water
Hi,
It sounds as if the main program board has developed a fault - as it should come to a complete stop. The fact it kept the water valve open with the door open is a serious fault- so I would have it checked before using it again.

Most machines have a water-stop feature - so if it develops a leak - it will shut off the water. This clearly didn't happen.
Read full answer
Aug 05, 2009 • Bosch SHU3036UC Dishwasher
0helpful
1answer

Bosch SHU3036UC draining on wash cycle
it is probably going to be a grimy door thermostat between the inner and outer panel. its hooked into the back of the soap dispenser. someone would have to take the outer panel off then clean wipe away the caked grime from the thermostat and put it back in its place. if this doesnt fix it then it could be a heat assembly problem or timer problem. in that case you would need an appliance tech out
Read full answer
May 28, 2009 • Bosch SHU3036UC Dishwasher
0helpful
1answer

We have a +11 year old Bosch SHU3006/UC/U06 that never leaves the wash cycle. We had to stop it during our last test run at 3 hours. Chat advise is suggesting a water temperature problem (I origionall...
Check continuity of the heating element to see if it is broken/open.
The dishwasher prefers that the incoming water (water heater) be 120 degrees (F)
Read full answer
Apr 04, 2009 • Bosch SHU3036UC Dishwasher
0helpful
1answer

Very long cycle time for Bosch DW
There is a recall on the control board of many of these models, butyour problem is likely not related. I have written a guide to help. It is here. Thanks!
Read full answer
Jan 05, 2009 • Bosch SHU3036UC Dishwasher
0helpful
1answer

Tried to replace bosch soap dispenser model shu3036uc/u12
Wire positioning doesn’t matter to soap dispenser. If water is leaking from the door then the dispenser is not pressed in properly against its seal. As far as the door not opening if wires are connected perhaps the problem is in the control module. Voltage meter on wiring to dispenser should indicate this while machine is running at start of quick wash cycle. (First 5 minutes of cycle on heating)
Read full answer
Dec 28, 2017 • Bosch 24 in. SHY66C02 / SHY66C06 Built-in...
0helpful
2answers

Bosch Dishwaher shy56a
Bosch dishwashers have a seperate pump for washing and another for draining. Try making it fill more than once. There is usually a timed fill and the float stops it before it overfills It also might prevent it from washing without enouth water Try defeating the door switch and play with the float during fill. There may be a sensor that won't let it go into wash. Be prepared to get a little wet if it should start up suddenly. A slightly safer way is to fill it with the sprayer from the sink. and see if it will go into wash.
Read full answer
May 08, 2008 • Bosch 24 in. SHY56A05 Stainless Steel...
0helpful
1answer

Stuck on first step of cycle (water draining). shu3036uc.
this may be due to a leak which you are not aware of. there is a float switch in the base which if operates, turns on the drain pump and nothing else. to check, tilt the appliance backwards 45 deg and see if water comes out of the back. if so, you are faced with identifying the leak which is often the main pump
Read full answer
May 17, 2007 • Bosch 24 in. SHU30 Built-in Dishwasher
Not finding what you are looking for?

View Most Popular

24 in. SHU43 Built-in Dishwasher

  • Dishwashers

Related Question

Service manual

  • Bosch SHU3036UC Dishwasher

Related Topics

535 views

Ask a Question

Usually answered in minutes!

Popular Questions

Display has error code h01

Bosch Dishwashers

Dishwasher does not fill with water

Bosch 18 in. SRS45E02 / SRS45E08...

The tap sign on my

Bosch Dishwashers

I keep getting E22 warning

Bosch 24 in. SHU43 Built-in...

Bosch Exxcel dishwasher. Message E09 what does

Bosch Dishwashers

Top Bosch Dishwashers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

JPG Manual
IMG_3927.JPG. user-manual-24 in. SHU43...

24 in. SHU43...

PDF Manual
. 24 in. SHU43 Built-in Dishwasher...

24 in. SHU43...

Loading...