Computer is not pick up signal from router - NetGear WGR614 Wireless Router

Note: You need to use a computer hardwired to the router to check the wireless settings.

1. Please open any web browser like Internet Explorer or Netscape Navigator.
2. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
3. A window will prompt for a user name and password. The default username is "admin" and the default password is "password".

Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it.

4. Click the Wireless Settings under Advanced tab.
5. Check the box under Enable Wireless Router Radio and Enable Wireless SSID Broadcast.
6. Click the Wireless Settings under Setup.
7. Change Channel (recommended are 1, 6 and 11).
8. Change the SSID to uniquely identify your network. You might have a similar SSID with your neighbor.

Note: Do not change the SSID if there are already other wireless computers that can connect to the network.

Other factors that you may consider when you are not able to view any available wireless network:

a. Switch for the wireless adapter is turned off
b. Distance between the wireless router and computer
c. Possible wireless interferences