What is a universal remote control for older rear projection tv

It will be very difficult to get convergence mode by a universal remote control. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2350 posts now. All are related to electronic equipment repair help.

You can simpley fix this problem!

Just buy a universal remote!
BTW: Don't buy a new kind but on older kind of universal remote!
It's just 10 bucks in a electric store!

These are the universal setup codes for Panasonic TVs. You can select any brand universal remote control, which bears any one of these codes in its code list for Pansonic brand. Brand name of the remote isn't a matter. Check its code list, whether there is a code for Panasonic. That is all.
Setup codes for Panasonic are: 0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

mgo1quad,

You have a bad convergence circuit. Not uncommon with older projection TVs. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, where to get the parts and how to make the repair.

You will need the original remote to set the convergence the universal will not work. You can get one at http://www.remotes.com for $85.00 US. Put your model in the search engine to find it.

Thanks for using FixYa and for the great rating.

hardrocko

Not all universal remote control's operate MENU button on TV!!!
If you have >>COLOR separation ( red blue green) and CAN NOT adjust via MENU button then you must replace conversion IC's>>
part number: STK 392-xxx.....easy repair!!

Try using goldstar or LG codes with the remote. (LG/Goldstar owns Zenith)


michtech

try a universal remote on the tv.

how do I Adjust picture size?

Here are the Toshiba codes for universal remote- 000,048,049,072,073,105,109,118,160,162,190,&241 try these codes and see if this works.ThankYou for using FixYa and Have a Nice day.

sgtdar, list the model & chassis number (located on back of tv), if set is old the universals won`t work because as more newer sets come out they delete the older ones because the chip in the remote will only hold so many codes, BMW Rider