We can not fax out but we can recieve faxes. Where should I look to fix this?

our Ricoh 1800l has stopped recieving faxes how do I fix this

You may have an option to block junk faxes turned on and it's interpretting all incoming faxes as being junk.

The Fixing unit of the fax is blown.Replace the fixing unit.

Phone Co ran a check and it was due to bad fax line so they fixed it.

The machine is set with the sleep mode as a default. The fax part can be changed to recieve a fax by pressing the fax mode button. Press it until it says Fax only, not F/T. F/T means Fax/Telephone. This mode would make it to where you have to pick up the reciever and press start when a fax comes in. The Fax only mode means it will pick up everytime a fax comes in automatically. Let me know if this was helpful. Please give my helping a rating. Thanks!

Try unplugging the power cord for 10 seconds to reset the machine.

Scroll through the menus and set your machine to AUTO or AUTO RECEIVE.

please help me how to switch my machine Brother MFC440cn to fax/tel mode.

YOU MAY NEED A NCU BOARD RPLCMNT

if you have the fax-575 there should be a TAD setting.

This is the setting you would use if you're using an answering machine on the same phone line as your fax machine.

To set the Recieve Mode :

Press Recieve Mode. The LCD display shows your current selection.

Continue to press Recieve Mode until your new selection appears. After 2 seconds the screen returns to the date and time display, along with your new Recieve Mode setting.


The 4 Recieve modes are Fax Only, Fax/Tel, TAD:Answering Machine, Manual.

Hope this helps!!!

i have fax L100 ,i can send a fax but i cant recevie a fax error is communication error (003F)