Aeq8000fs how old is unit - Frigidaire AEQ8000FG Dryer

The Frigidaire AEQ8000FE electric dryer is displaying the 50 and start/stop lights blinking randomly with periodic beeping. Pressing the control panel clears the issue, but it returns after a few minutes. Despite this issue, the dryer is working properly.

check worn belt or bad pulleys. and lastly bad bearings

If you have swapped out your old factory radio with another factory radio from a different unit, it will not work. It is coded to the VIN#, Just to replace a radio at the dealer you must link up and download the current configuration from the old unit using the GM TECH-II, then remove the old unit and install the new one, upload the old config files to the new unit and hope it works. Sometimes it doesn't and you have to keep swapping units back and forth to download and upload and eventually maybe getting a successful upload. If all your doing is replacing the factory unit with another factory unit, it will work if you take it to a dealer and they do the process explained above. Just don't throw out your old radio, they will need it because all of your old config files are still in it!
I hope this info helps!~subyguru~

Check your circuit breaker for the outdoor unit,seperate from the furnace.

1 month old? It's still in warrenty. Call for service. sounds like the motor will not start in the wash direction.
Eric

need model #

Your model number is not complete enough for a model check.
However, 18,000 btu in todays' units is what you need.

• old school hollywood baseball old school hollywood baseball old school hollywood baseball old school hollywood baseball old school hollywood baseball
  

THe old transmitters have a differnt code...more than likely your new one is a riolling code and the old ones are not. They are not interchangeable.