SOURCE: WASTE INK NEAR FULL
For Canon Multi PASS F60 Printer:
"Waste Ink Near Full" Error on LCD Display Screen
On Canon Support, the fixes are one of two things:
1. Turn of printer (holding on/off button for about 1 second) and wait approximately 10 seconds. Turn printer back on. If on/off button does not turn printer on/off, then unplug the printer.
2. If the above doesn't work, your printer may need to be fixed.
-
What's not said on the website: What does the error "Waste ink near full" mean.
SOURCE: Canon MultiPass F60 "Waste ink near full"
Okay, follow these steps below to reset this message:
1) Enter SERVICE MODE. By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Then call Canon 1-800-828-4040
Just inform them that you
have already reset the counter so the error is gone, but you needed to
know if there is a part that needs cleaned or replaced to prevent
further problems.
SOURCE: Waste ink near full
Here is a link that provides info about this problem. hope this helps.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=2610&modelid=10443#SupportDetailAct
SOURCE: canon multipass f80 error waste ink near full
ok
This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
SOURCE: Waste in ink tank near full
Hi there
There no easy way the printers are been made this way so you take them to the shop, but if you are handy with your hands and know what you are doing then you will need to take all apart and take out the ink pads inside the printer and clean them up make sure they nice dry when put back in, then you are going to need a program that you can find on the internet it will be called waste reset tools, or your printer will not work even after you done the clean out.
I am not sure what canon you have so I cant tell you the tools you need for yours, i have got canon MP-Tools on my website if this is the one you need.
with this you can reset the waste ink tank before you do the clean out but remember in time you will need to clean out or it going to be a big mess of ink coming out your printer.
Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time
44 views
Usually answered in minutes!
×