Cleanin printer brother

Brother printers of that model have a lot of trouble with the print heads. Most are not worth repair but as a last ditch effort you can try cleaning with acetone.

This procedure It is easy. Used baby cleanining tissues and tiny screwdrivet to remaches the purge box. Cleanining it until the tissue seems to be clean

Sir/Madam

These types of lines are typically caused by dirt or tippex (correction fluid) on the scanner unit, or the corona wire is dirty. This problem is usually resolved by cleaning the scanner glass, scanner glass strip and white plastic bar with a soft lint-free cloth, or cleaning the corona wire.

I suggest You Go to Official Brother Printer trouble Page For You Brother Printer Problem On Below Brother Printer forum URL Link:

http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/faq/faq/000000/002900/000044/faq002944_000.html?reg=eu&c=eu_ot&lang=en&prod=mfc297c_eu

I Hope You resolve Your Brother Printer Issue,

OR

In case You Need Online Assistance Then follow Us For ON:


Brother Printer Support

you can download the user guide in english language from this link: http://welcome.solutions.brother.com/BSC/Public/files/dlf/doc000222/Mini2LowBase_UkEngUsr.pdf for the error enable to claen see page 11-4

Brother model MFC-215C is not working. It says: cleaninig impossible. Try trouble shooting and routine maintenanace. What can I do to solve this problem?

Your black printhead is blocked.
The printhead is deep inside the printer and has to be taken out by the expert and cleaned with the help of 'steam' and hot water. This is because not using the printer for a long time. or using low grade refill inks.
Please select new cartridge only if you are inserting a new cartridge or fully refilled cartridge. Otherwise use old cartridge option. Brother printer has a mechanical sensor and not the electronic chip in the ink cartridges.
After inserting the old used cartridge if you choose 'new cart' option it will show the "Full" ink. You can still print from the exhausted ink cart after covering the sensor in the middle by a piece of paper in emergency.

The problrm is in drum unit u have to clean it or changet it!also try another toner cartridge befor cleanin' the drum! and u have to check the fuser unit - if it's need it has to be cleaned up!

clean head

I have cleaned, retested and new ink and it still will not print Black

do you use generic ink? If yes, use an original brother ink cart! Because of the additives within the brother ink, cleaning substances will keep the ph clean.

If you still have trouble please post again here