Question about Creative Labs Gigaworks S750 Computer Speakers
Gigaworks 7.1 surround sound system. problem is no audio output, no indicator lights on control box. green power led on powered sub blinks on and off. no hums, pops, buzzes or odors. from what i read here this is the last Creative system i will ever buy. looks i will be parting it out on ebay,
Replace elco C61 (68uF/450V) ; it is empty or almost empty.
Also remove the dark-brown glue carefully. The glue turns from light to dark brown by heat and becomes conductive (some Mohms)
Posted on Nov 13, 2009
Trying intalling a sound driver may help
Posted on Jun 29, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 21, 2016 | Bose Lifestyle 48 System
Dec 15, 2015 | Pioneer Audio Players & Recorders
Nov 14, 2015 | Kidde 4618 Firex Hardwire Ionization Smoke...
Apr 08, 2015 | Mitsubishi WD-65731 65-Inch 1080p DLP HDTV
The front panel Status LED provides an indication of
the set's operation and the possible cause of a malfunction.
If an abnormal condition is indicated, perform the
Self Diagnostics procedure.
To activate, press the front panel <ACTIVITY> &<CH
??> buttons at the same time and hold for 5 seconds.
The STATUS LED will then flash denoting a two digit
• The number of flashes indicates the value of the
MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2
• The LED then flashes indicating the value of the
(ones digit) of the Error Code.
• The Error Code is repeated a total of 5 times.
Example: If the Error Code is "23", the LED
will flash two times, pause, and then flash three
Table 2-2: LED Indications
Error Codes, descriiptions and the most likely cause of
the error are listed in Table 2-3.
Note: The TV must be in "Shut Down." The LED
will probably be indicating an abnormal
condition. If the TV is switched Off, AC is
removed, or a System Reset is performed, the
code automatically resets to "12" No Error.
See the Error Code Log to retrieve a history of
Note: Use the front panel buttons, not the remote
Note: If there is no response, the front panel may be
locked by a V-Chip setting. To unlock, press
and hold <ACTIVITY> on the front panel for
LED Indication Condition
Off Off (standby)
Green Power On
Slow Blink Green Power Off with Timer Set
Fast Blink Green (80 seconds) > Off Power Off (Cooling fan still working, 80 sec)
LED Indication Condition
Red Lamp Failure
Yellow TV Too Hot
Slow Blink Red TV May Require Service
Slow Blink Yellow Lamp Door Open or No Lamp Installed
ABNORMAL INDICATIONS (For details perform Self Diagnostics Procedure.)
Jul 07, 2014 | Mitsubishi WD 65837 65 in. HDTV
Apr 30, 2010 | Creative Labs Gigaworks S750 Computer...
Feb 15, 2010 | Canon PIXMA iP90 Mobile Printer
Jul 08, 2009 | Creative Labs Gigaworks S750 Computer...
Oct 18, 2008 | LRD6399SWS Radar Detector
Apr 03, 2013 | Creative Labs Gigaworks S750 Computer...
3,435 people viewed this question
Usually answered in minutes!