Sounds like the controller has crashed.

If you have a Fiery, reboot it and see what happens.

If that does not help you better call a Technician as it may need to be reloaded.

Anonymous

214 Answers
Posted on Apr 28, 2009

SOURCE: Double-sided copy output

In print dialogue box there will be a setting for long or short edge binding, associated with duplex printing. Find it and try it. Good Luck.

Ben

108 Answers
Posted on Jun 15, 2010

SOURCE: konica bizhub 7272 imprint is too light

First I would try fresh paper from an unopened ****. You could have moisture in the paper.

Some toners have a tape that has to be removed from the toner before installing into the machine. On the 7272 series machine there was a problem with the gears on the back of the developing unit wearing out and not adding toner. The machine would have made a loud grinding/gear skipping noise prior to failure. If this occurred the seals on the developer unit have gone bad leaking developer into the gears and ruining them. The developer and the developer unit will have to be replace.

Another possibility is the Transfer corona wire has broken or is dirty. Open the two front doors, lower the center lever and pull out the transport unit. A little the the left of center you will see some black paper guides, and under those guides are two channels. There should be two hair thin wires in one channel and one wire in the other channel. The single wire is the transfer wire. Make sure it is clean and not broken.

Zaheer Ahmed

347 Answers
Posted on Nov 03, 2010

SOURCE: I have the bizhub C352 - I want to print the

to print meter readings perform these steps. 1-press "utility/counter" 2-press "details" 3-now at the left side of the screen you will see a "print" button, press it and get your copy.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

I JUST BOUGHT A SHARP AR-5127 COPIER..WHEN IT COPIES, IT BRINGS OUT BLANK PAPER. I REMOVED THE CATRIDGE AND IF I TURN IT UPSIDE DOWN,SOME BLACK DUST COMES OUT...PLEASE SOMEONE HELP ME

Hi iheanyippaul,

I see you concern, I believe you will need to check your toner if it is placed properly inside the machine seems that it is not locked/latched in its place to be able to print properly reason why you get a blank paper and black dust when printing.

Remove the Toner and re insert it again making sure the toner is set properly inside and also make sure the correct toner cartridge is installed, an incorrect or incompatible toner can cause issue of not getting to print anything on the paper or possibly not fit inside the machine correctly.

I hope this helps.

Have a nice day,

mvincentc

Read full answer

Jul 07, 2011 • Sharp AR-5316 Advanced Digital Imager...

4helpful

2answers

The printer runs properly but will not print; A blank page cycles

It is not the toner. There are 2 things you can try yourself, anything else requires service. First try opeing and closing the right hand side door. Try this several times if necessary. There are contacts in this door that sometimes don't make contact and opening/closing the door will sometimes resolve blank copies. The other thing you can try is remove the toner then pull out and reseat the drum unit. Here again there are contacts that need to be made that can cause blank copies.
Good Luck and Thank You for using Fixya.

Read full answer

Apr 09, 2010 • Sharp AL 1631 Copier

0helpful

1answer

I have Panasonic Workio DP-2310 copier and there were multiple lines the length of the copy .I cleaned entire copy and drum area and installed new toner cartridge now the copies are coming out blank , no...

check you drum charge connection between drum unit and developer unit, two metal strips at back that contact when the two unit are closed. none or bad connection means no charge and then blank copies

Read full answer

Feb 01, 2010 • Panasonic Workio DP-2310 All-In-One Laser...

0helpful

1answer

Fax quality poor when recieving fax from samsung scx 4521F

Good Day Sir, Hope my suggested solution will resolve your problem.

Condition: The incoming fax has a blank spaces or is of poor-quality.

Solution:

The fax machine sending you the fax may be faulty.
A noise phone line can cause line errors.
Check your machine by making a copy.
The toner cartridge, referring to "Replacing the Toner Cartridge".

Redistributing the Toner

Open the Front door.
Pull the toner cartridge out and remove it from the printer.
Gently shake the toner cartridge from side to side five or six times to redistribute the toner.

Have a nice day and God bless.

Read full answer

Oct 09, 2009 • Samsung SCX 4521F All-In-One Laser Printer

0helpful

1answer

Blank copies

see the cartridge do is good installed.
Remove the cartridge and putt it again.
If the problem do not go away please try with other cartridge.
Or if the printer is ink-jet printer and you have not used it for some time than the ink can be stuck

Read full answer

Jul 16, 2009 • Office Equipment & Supplies

0helpful

4answers

Kyocera Mita 1635 Copier Printing Very Light Copies

Is one side lighter then the other side of the copy? Meaning uneven copy darkness? If so, I believe the problem is that one or both sides of the drum cartridge and the developer are not connected correctly. The two parts need to be close togather to make a nice dark copy. This model has a very wierd drum unit and has a defect that one or both side of the drum unit locking tabs break and you get very light or blank copies. It's some what coastly to replace the whole unit... That would be a worse case.... If it is just on one side you might be able to push on the cover on the side that is light. If the copies come out better. One side is broken..I would fold up some paper and make a wedge to push the catridges closer. Good Luck

Read full answer

Apr 15, 2009 • Kyocera KM-1505 Copier

0helpful

1answer

Canon Copier Model C122F - error light flashing

A common mistake is that people think that the waste toner needs to be emptied and instead the toner needs to be replaced --- and vice versa. Check to make sure that the toner bottle is not empty. Also, if you made copies that took ( used ) more toner then the machine was able to replenish, the machine has not had a chance to catch up. Place a white sheet of paper on the platen glass and make blank white copies. You may only be able to get 1-2 copies at first but as the device catches up with the toner replenish you should be able to make more. The blank copies you make -- do NOT put that paper right back into the machine. Lay it flat and let it cool, this will help prevent unwanted jamming due to heat build up in the paper. IF you have good amount of new toner in the machine, gently tap the front line ( or rear line) that feeds the used toner into the waste bottle. Sometimes the waste toner will clog and back up into the machine giving false 'waste toner full' message.

Read full answer

Jan 04, 2009 • Canon Office Equipment & Supplies

3helpful

1answer

What is a corotron wire

It sounds like the wire that charges the drum has broken or has a bad connection. If the drum does not get charged it will not attract toner and therefore blank copies. As i do not know the make an model of your machine I cannot give you further information.

Hope this helps.

Read full answer

Aug 14, 2008 • Sharp AL 1631 Copier

0helpful

1answer

Does not print has blank copy

Before you added toner was it working OK, but it was asking for toner? If so the problem may be simple. The Blue lever you pushed down and to the right to release the Developing unit, was it locked in at the Nine o'clock potion? Is it now at the Nine o'clock position now or is it in a different position now. If so make sure it is at the Nine o'clock posisition now and that the front door can close correctly. Good Luck

Read full answer

Apr 19, 2008 • Canon ImageRUNNER 330s Copier

0helpful

1answer

Can not receive faxes or blank pages com thru!

Can you make a copy and get a good print? Does the blank pages come from different people? If you still get a blank from making a copy, then try a different toner and or drum unit. Hopefully it is still under warranty.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Read full answer

Aug 01, 2007 • Brother IntelliFax-2820 Laser Fax

Not finding what you are looking for?

View Most Popular

magicolor 2400 Laser Printer

Office Equipment & Supplies

I JUST BOUGHT A SHARP AR-5127 COPIER..WHEN IT COPIES, IT BRINGS OUT BLANK PAPER. I REMOVED THE CATRIDGE AND IF I TURN IT UPSIDE DOWN,SOME BLACK DUST COMES OUT...PLEASE SOMEONE HELP ME

Sharp AR-5316 Advanced Digital Imager Copier

52 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Printers Report

View all Fixya Reports

Top Konica Minolta Office Equipment & Supplies Experts

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

. magicolor 2400 Laser Printer Manual

magicolor 2400 Laser...

Have a manual for Konica Minolta magicolor 2400 Laser Printer? Or just drag it here!

Related Topics:

My konicaminoltamagiccolor2400w made one copy it came out nice now it makes blank copies why?