Sport & Outdoor - Others Logo

Related Topics:

A
Anonymous Posted on May 21, 2014

Lycoming service bulletins

Sb359

1 Answer

Aerosputnik

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Contributor 48 Answers
  • Posted on Nov 15, 2014
Aerosputnik
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Jan 21, 2013
Answers
48
Questions
0
Helped
34506
Points
75

Hi. Lycoming Mandatory Service Bulletin 359 relates only to Lycoming O-235 F and O-235 G engines. These engines have a different power rating than the more common O-235 L engines.

The service Bulletin requires the owner/operator to replace the normal Champion REM38E Spark plugs because they are too HOT for the engine and may cause detonation (pre-ignition) which will seriously damage the engine. The Bulletin recommends replacement of the REM38E plugs with AC-86 Spark Plugs which must be gapped between .018 inches and .022 inches.

Hope this answers your question: Rgs. Bob

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Static noise coming from the dashboard of 2005 Buick lacrossr

Automotive Recalls and Technical Service Bulletins for 2005 ...

www.alldatadiy.com > Factory Service Bulletins and Recall Titles
Automotive Recalls and Technical Service Bulletins for 2005 Buick LaCrosse V6-3.6L VIN 7. ... PIP5191 APR 14 Engine - Ticking Noise on Cold Start Up. PI1217 APR ... 03-08-44-005L APR 12 Audio - Poor Radio Reception/Static Interference.
0helpful
1answer

Cannot remove a constant speed prop from a lycoming engine

What sort of Prop do you have and what engine model is it fitted to?
0helpful
1answer

Can I be certain that my new E-Drive will fit my Lycoming installation?

A starter that is a replacement may not always fit the actual installation of your engine that is why manufactures offer a variety of models.

0helpful
1answer

Ther is a knock in the steering colom when you turn left or right.

You may have a noisy Upper Intermediate Steering shaft. There is a service bulletin regarding this type of noise [bulletin #00-02-003N, dated March 26, 2008] that explains what needs to be done. It's just a service bulletin and NOT a recall. Most competent shops will have seen this problem many times and will know what to replace. Good luck, hope this helps!
4helpful
1answer

Fujitsu power supply shutdown goes to standby mode. no picture. If I turn it off for a while I get great picture and after a while it shuts down and goes into standby mode. Is this a power supply that is...

This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in the P42HHA10 model. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A similar Service Bulletin is probably available to suit your model. A competent service technician should be able to implement the service bulletin.
1helpful
1answer

Fujitsu Plasma Screen won't power up

This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu '[email protected]'
0helpful
1answer

Turns off after awhile

This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu '[email protected]'
0helpful
1answer

Fujitsu 42" Plasma Display shuts off after 20 minutes

This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu '[email protected]'
Not finding what you are looking for?

823 views

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

john h

Level 3 Expert

29492 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...