Miolta c300 c3851 - Konica Minolta bizhub C250 All-In-One Laser Printer

Stop using printer until repairs are made

What model sir?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

For P-7 replace the magenta image unit
for P-5 and P-28 unless you know your way around Konica Minolta Copiers you need to have the two sensor located below the transfer belt on the right side cleaned and or replaced, to clean them you must uncover them because when the belt assy. is remove the are covered.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

described the problem

machin problem servie code c3851

post of copier tech net

fuser module problem...has to be removed and troubleshoot... problem will be fixed.....

access panel inside the front door

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NO that machine is a legacy machine form Minolta which had it under QMS now Minolta is Konicaminolta try their web site but doubt you find a driver for that a machine on window 7 best bet would be windows 95 at best xp

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

C3851: Abnormal Low Temp. (Heater)

Restart, holding utility key down and do troble reset, if everything is ok, the machine will work again, if not, call for service