What size screw for haier 46h3280 stand - Panasonic Viera TH-42PZ80U Plasma TV

This depends on the model being hung on the stand. The size screw to use is usually listed in the manual. Also make sure to check the maximum length of the screw or you can damage the TV.

I could not find the screw size. However I found a link to a genuine screw, USD 2.50 per. Confirmed that your model number is in the "Found in Models" dropdown.

TVserviceParts com Samsung 6002 001294 Screw Tapping BH M4 L16 ZPC Black

Take the Stand to the hardware store and have them try a few sizes that fit. You need Machine Screws and who knows what length?

THERE IS 4 BIGGER SCREWS ON THE BACK OF THE TV TAKE THEM OUT AND SLIDE THE STAND OUT ....SCREWS ARE RIGHT BY AMP JACK HOOK UPS....
I HOPE THIS HELPS.. GOD BLESS..

Hello,

There are different types of stands as well as the screws vary. It is by the exact type of stand we can provide a screw size.

Another solution is for you to try to reach the dealer that supplied the TV stand to you, so as to get the exact screws that came with the stand.

Take care and good luck

am not sure on size service manual doesnt say but there 2 1/2 long.

Is that a problem? Check the hole size and choose a screw with a head that is bigger than the hole size. Typically select a minimum of 4mm diameter screw.

You are correct. Polaroid does not make the screws available. You will have to obtain locally, per Polaroid.

use a flat head screw driver... place the screw driver between tv and the stand....tilt the screw driver up and down... go from each side left side of the tv the the right. continue til the stand is of completely... be gentle so there is no damage on the tv.