Panasonic kx-t7030 FWD/DND button

What happens when you dial 165 on the intercom? If you get voice mail, then try dialing 7104 165 # on the intercom. That sets CF-No Ans to voice mail for your set and the FWD/DND button should light solid (or not, it's a program option) or flash. If you dial 7101 it should turn on Do Not Disturb (7100 cancels). In DND, the FWD light should flash.

Once you have set these two conditions up, the FWD/DND button has 3 states, FWD, DND, and OFF.

Carl

Actually, you have a 7030 PHONE. The system it's connected to could be anything from a KXT-61610, 123211, TA-624/824, TAW848 or any of the other Panasonic systems.

If you happen to be connected to a TA series box, try dialing 710# on the intercom. It will cancel DO NOT DISTURB. (714# sets it). In passing, the # can also be replaced with 0, so a sequence dialed on the intercom that starts 7140 would have set it).

Carl

Somewhere in your user's manual you will have code instructiohns for CALL FORWARD. It starts with 71. In a TA series it's 711+ext+#. In a TD 710x+ext+#. The conditions vary, and the TA has very limited forwarding codes 1/2/3

In a TA you can also press the FWD button and dial 1+ext+#.Your other choice is 2.

Both of those are done while listening to intercom dial tone.

Carl

Press Program button
Dial **1234
Dial 000
Press SP Phone Button Twice
Dial Hour (00-12)
Press FWD/DND button
Dial Minutes (00-59)
Press FWD/DND button
Press Auto Answer button to select AM or PM
Press Autodial/Store button
Press Hold button
Press Program button

Try pressing the FWD/DND button and look at the display. It might have 3 steps, FWD, DND, and FWD/DND Off. When you reach the Off part, the light will go away.

Carl

I think you can press FWD and dial 0 to reset. If that doesn't work, try dialing 700+ your extension on the intercom. That should always work, no matter what system the phone is connected to.

Of course, if neither one works, please post back the model number of your SYSTEM cabinet (the white box in a closet, electrical room, back office, etc.).

Carl

pickup the handset (phone... watever) and press the FWD/DND button then press #2 then type in the number of the mobile (or number you want to forward to...), and hang up the phone... then when your finished with the call forwarding function, press FWD/DND again and this time press #0

What 2 does it turn on the call forwarding feature
. and 0 turns off forwarding/do not disturb functions

theres 5 different functions after you press FWD/DND

0: turns FWD/DND off
1: put the phone into Do Not Disturb Mode
2: call forwarding
3: Busy-Forwarding.. which means if your on the phone and someone rings, it forwards them to the number you specify
4: No Answer- when you don't answer the phone if forwards the caller onto the number you type in
and lastly 5: Busy/No Answer- does both function 3 & 4

i hope i've helped

, Cameron

Panasonic KX t7730 call forwarding function to external party:
If you are using the Kx-TA624 pbx (TES 824 models) system, program your phone unit (t7730) as follows: lifet handset, press FWD/DND button, press 3, then the outside line access code, then phone number, then #, then return handset.
If you are using the kx-ta1232 (higher models) of pbx system (usually with 9 or more CO lines cabable, use the following command:
lift handset, press FWD/DND button, press 6, then the outside line access code, then telehone number, then # then return handset to cradle.

1) Press PROG, follow by programming no. 50 or FWD/DND button.
2) Press ENTER or STORE, follow by selection no. 0=OFF FWD/DND, 1=ON FWD/DND.
3) Press ENTER or STORE to save the setting.
4) Press EXIT or PROG to quit setting mode.

YBC (/\)

• Call into your mailbox (usually by dialing intercom 165)
• Press 4, and 4 again (for "Incomplete call handling")
  By default, three options are enabled:
  option #1: leave a message
  options #5: call the operator
  option #6: return to top menu
• Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.

Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail

Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.

Use Absent Messages to show text messages on other people's phones when you are away.

Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.

Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.

Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.

If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).

Dial 330 to make an announcement to all phones.

If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM