Question about Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

2 Answers

Was dropped. Now will do everything EXCEPT take photos. Lens, display, flash, etc. etc. all work fine. Just no screen image or photo when in "shoot" mode.

Tried everything. No apparent case damage. Lens opens and retracts fine. As stated above EVERYTHING works except doesn't take photos or display image when in photo mode. Review of stored photos works fine.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

Sounds like the CCD or a stuck shutter blade. Try this place: www.CamerasAndParts.com They only service Canons and they are the only place we recommend for the Canons. It's all they work on and they are about half the price of most shops, plus the work is just excellent through them.

Posted on Jan 02, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,715 Answers

If not a local camera repair place, one can send it back to Cannon who does have a mail in repair service for digital camera's.

Posted on May 15, 2014

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

t00nz

CameraR

  • 4738 Answers

SOURCE: Lens blocked? Canon PowerShot SD1100 IS, recently water damaged

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open).

To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see the following for further info and a simple fix that may help:

http://camerarepair.blogspot.com/2009/05/simple-fix-for-stuck-shutter.html

Posted on Jul 14, 2009

Anonymous

  • 367 Answers

SOURCE: Canon Powershot A720is -screen broken

This is somthing your going to have to get fixed at a shop

Posted on Jan 20, 2009

Anonymous

  • 2985 Answers

SOURCE: blank screen

So you can see images that are on the card from previous taking but not new? Just to confirm - this is an optical SLR? With a mirror that flips up when you press the button - is that right? If so it souns like to mirror is not going up. Can you hear it go up? Come back

Posted on Jun 17, 2007

old marine

old marine

  • 2277 Answers

SOURCE: Canon PowerShot A80 - no display through the lens

See this link. The symptoms indicate that your CCD (image sensor) failed. Canon will repair this at no charge, regardless of warranty status. Contact them as described at the link.

Posted on Nov 16, 2009

Testimonial: "I am returning camera to Canon for free repair (and they pay for shipping). Hopefully this will come true. Thank you for prompt excellent advice."

zafeyz

  • 2 Answers

SOURCE: with a canon 1000d, shutter button wont work, have

try to disable the mirror lockup at C.fn no. 8

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung D760. Lens won't retract all the way when turned off!


bet you havent tried this!
OK you are probably going to think I am loony giving you this advise But No I am completely sane!

Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.

Blow around the lens in all the extension joins the firmly slap it in the palm of you hand with the side of the camera making contact with you palm. Do the procedure two or 3 times and inbetween the slaps turn it on to activate the lens mechanism. I have now fixed about 80 of these cameras with this method. I obtained the fix from Sony who charge $90 to do exactly the same. Keep at it as it will eventually work. One tip, make sure the battery is charged before you do this.

Please rate our help to keep the service online

Sep 01, 2009 | Cameras

2 Answers

Turn camera on, lens goes in and out then camera shuts off


You may try resetting the Camera to the original factory settings.
If the issue persists then service will be required.

Aug 27, 2009 | Panasonic Lumix® DMC-FS3 Digital Camera

1 Answer

Lens error, restart camera


Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.

Apr 28, 2009 | Canon PowerShot SD850 IS Digital Camera

1 Answer

Nikon d200 sprayed with water


I would suggest that you give the contacts a good clean (gently of course) on both the camera body and lens'.

Also although the water would make no difference, make sure if you have any lens' with aperture rings to put them round to F33 or the smallest aperture, if they aren't this will cause the fEE.

Hope this helps

Drew

Oct 06, 2008 | Nikon D200 Body Only Digital Camera

1 Answer

E-GeForece 6200 displays partial image when plays avi video


hi im wesley. um a problem might be that the players you are using dont have the right plug ins or dont support the file try using vlc player it works with almost everything

Jul 07, 2008 | Evga e-GeForce 6200 GeForce 6200, (256 MB)...

1 Answer

Lens or CCD adjustments/ master reset, Somethin?!!!


ok there is no master reset for the CCD any how take the Old CCD from the other lens and put it on the new lens make sure the ribbon cables are straite in the socket and you should be good to go. hope this helps if you need any more help let me know goto www.digitalcamrepair.com for more help.

Apr 22, 2008 | Sony Cyber-shot DSC-W30 Digital Camera

3 Answers

Bonnie


I was getting the Lens Error message on my A730, even though my lens seemed to be working fine. I'd had the camera in my pocket, and apparently it tried to open but jammed. But it seemed to be OK except for the cursed Lens Error message when I'd power it on. The way I found to fix it is press and hold the "func/OK" button on the back, then turn the camera on. Now it's working again. Note that this may not work for you if your lens is actually screwed up. Mine wasn't.

Dec 12, 2007 | Cameras

1 Answer

Lens opens and then gets stuck


I just had this same problem. The lens came out all the way, but then make a crazy beeping and clunking sound. The LCD would not come on. I took off the casing, and the clunking sound was coming from the mechanism that has gears in it, and seems to be what makes the lens come out. I tried blowing canned air into it, and banged it around, but nothing worked. Then I pulled a little too hard on the lens and accidently pulled the whole lens off. Oops. Looks like a new camera for me. So my solution is: don't pull on the lens.

Sep 19, 2007 | Casio Exilim EX-S500 Digital Camera

2 Answers

When i turn the camera to take a photo, no image appears in the LCD or the eyepiece. this just happened all the sudden. I am able to view pictures that I've already taken in the LCD and the LCD will also...


there may be two reasons for this problem. 1. may be a defective or broken CCD. 2. the shutter is not working may be due to broken flex circuit cable. in any of the case you have to get it fixed from a professional camera repairer

Aug 02, 2006 | Fuji FinePix S5000 Digital Camera

Not finding what you are looking for?
Canon PowerShot  SD800 IS / IXUS 850 IS Digital Camera Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Poul Brinchs Larsen

Level 2 Expert

159 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...