Bosch Classixx WFC 2465 Front Load Washer Logo

Related Topics:

A
Anonymous Posted on May 12, 2014

How can I remove in order to flush the waste pipe from a Bosch Classixx 1400 express

5 Related Answers

Anonymous

  • 228 Answers
  • Posted on Sep 19, 2009

SOURCE: when I select a cycle the -0- is displayed and the lock symbol.

YOU PROBABLY HAVE THE CHILD LOCK ACTIVATED GENERALLY HOLDING THE LOCK BUTTON IF THERE IS ONE OR THE START BUTTON FOR 5 SECS OR MORE WILL TURN IT OFF ALLOWING NORMAL USE

Ad
57 varieties

Karl Wright

  • 1653 Answers
  • Posted on Oct 23, 2009

SOURCE: my bosch classixx 1400 express is not draining off

The error indicates that the machine has taken too long to drain the water. Do the following.

  1. Switch off the machine and disconnect the mains power.
  2. Remove the access panel on the lower right front of the machine.
  3. Remove the filter and make sure that the filter is not blocked and is clean and clear of all debris. Clean as required.
4. Proceed by checking the drain hose for proper connection and kinks and make sure that it is not blocked.
5. Also check that the main waste drain pipe, if you use one, is not blocked and clean if required.
6. Reconnect the power and switch the machine on.
If the problem persists then do the following.
7. Switch off the machine and disconnect the mains power.
8. Check the electrical connections at the pump and make sure it is operational.
9. Remove the connecting hoses, and expect water to drain out and make sure the pipes are not blocked with debris or any object blockage.
10. Makes sure the pump appears clear and that the impeller looks in good condition.
11. Reconnect the hoses and then reconnect power and switch the machine on.
12. If problem has not been corrected, then remove the pump and check that the drive coupling to the motor is OK and that the motor turns OK. If all is well then replace the pump.

Anonymous

  • 1382 Answers
  • Posted on May 19, 2010

SOURCE: door wont open on bosch classixx 6 1400 express washing machine

Hi,
The "F16" on a Bosch indicates the door is open / unlocked. If it's happening during a wash it would suggest either a faulty door lock, faulty wiring or worse, a faulty main control board. The wash program should halt when this comes up but you should be able to restart it when the door is closed. As the cost of a new door interlock isn't overly expensive. The best way to fix this problem is to purchase a new lock and fit it.
Thank you !

prem mathew

  • 662 Answers
  • Posted on Jun 14, 2010

SOURCE: bosch classixx 1400 express key symbol

Power on, press the start button for 5 or 6 seconds, the sign will go off. Try the door gently.

Pl rate me 'very helpful' for the free help, thanks

prem mathew

  • 662 Answers
  • Posted on Jun 14, 2010

SOURCE: key symbol showing

Power on, press the start button for 5 or 6 seconds, the sign will go off. Try the door gently.

Pl rate me 'very helpful' for the free help, thanks

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have bosch classixx 6 washing machine with F22 code flashing ?

How to reset Bosch Classixx 1400 Express


hi,couldn't find too much detail about the fault , may be faulty brushes an commutato......the abovel ink gives details and how to reset after f22 message

good luck
r
1helpful
1answer

My bosch classixx 1400 express washing machine drain pump sometimes does'ent work

bosch classixx 1400 express washing machine drain pump This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook
6helpful
1answer

Bosch classixx 1400 express manual

Go to:

https://portal.bsh-partner.com/portal%28bD1kZSZjPTAwOQ==%29/PORTALFRAME.HTM

This has all Bosch manuals.Bosch appliances have a unique E-NR (E Number) which will normally be found inside the door of the appliance. You will need this in order to download the correcy manual. Mine is WAE28162GB/03 for example.
0helpful
1answer

I have a Bosch Classixx 6 1400 express washing machine which works fine but only splns very slowly,What can be the problem ?

Probably needs new brushes fitting in the motor, you will have to remove the motor to do this.
3helpful
2answers
0helpful
1answer

How do i reset my bosch classixx 1400 express

My Bosch classixx frash 3 signal light on d spin speed
side
12helpful
1answer

Got the Bosch Classixx 6 Express 1400 washing machine cant

Power on, press the start button for 5 or 6 seconds, the sign will go off. Try the door gently. Means the machine is locked, for children. I think if you do it again it locks.

Pl rate me 'very helpful' for the free help, thanks
47helpful
1answer

Key symbol showing

Power on, press the start button for 5 or 6 seconds, the sign will go off. Try the door gently.

Pl rate me 'very helpful' for the free help, thanks
8helpful
2answers
6helpful
2answers

My bosch classixx 1400 express is not draining off and has a lot of grey stuff on the clothes is this dirt

The error indicates that the machine has taken too long to drain the water. Do the following.

  1. Switch off the machine and disconnect the mains power.
  2. Remove the access panel on the lower right front of the machine.
  3. Remove the filter and make sure that the filter is not blocked and is clean and clear of all debris. Clean as required.
4. Proceed by checking the drain hose for proper connection and kinks and make sure that it is not blocked.
5. Also check that the main waste drain pipe, if you use one, is not blocked and clean if required.
6. Reconnect the power and switch the machine on.
If the problem persists then do the following.
7. Switch off the machine and disconnect the mains power.
8. Check the electrical connections at the pump and make sure it is operational.
9. Remove the connecting hoses, and expect water to drain out and make sure the pipes are not blocked with debris or any object blockage.
10. Makes sure the pump appears clear and that the impeller looks in good condition.
11. Reconnect the hoses and then reconnect power and switch the machine on.
12. If problem has not been corrected, then remove the pump and check that the drive coupling to the motor is OK and that the motor turns OK. If all is well then replace the pump.
Not finding what you are looking for?

113 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...