Try setting the unit to factory defaults.
This will reload all to factory defaults
You will loose all data saved.
Testimonial: "i did this already it still is doing the same thing it turns on show zeki screen then goes to black android screen nothing after that"
SOURCE: my tablet froze and now
Hello!
Here you can try the following procedure to unfreeze your tablet:
First: Hard Reset
1. With the Samsung Galaxy Tab turned off, press and hold the VOLUME DOWN button, and then, briefly press the POWER button.
Second: Remove SIM card
1. Take out the SIM card and put it back in.
2. Then it will turn right on
from the beginning if you press the power button.
3. If that doesn't work,
it means it needs to charge.
Third: Resets
Try one from the procedures below
1. Hold the POWER button for 10 seconds
2. Hold the POWER and UP VOLUME for 10 seconds for recovery mode
3. Hold the POWER and DOWN VOLUME for download mode for 10 seconds
If none of them works. Remove the battery and leave it off for 10 minutes. Then, return back the battery. If problem persist in the future, I would recommend to replace the battery.
SOURCE: my binatone homesurf tablet is stuck on the home screen and wont do anything can you reset it
Sounds like it needs a reset.
The Binatone Helpline is available from 9.00 am to 5.00 pm, Mondays to Fridays, please call0845 345 9677 for UK+491805938802 for EuropeAustralia customer service number 1300 768 112 or email to [email protected] India customer service number +91 7503011385 or email to [email protected]
http://www.binatonetelecom.com/binaries/content/assets/binatone/products/android-products/homesurf-7/pdf/homesurf_7user_guide.pdf
The manual has very limited troubleshooting, so it looks like you'll need to call them.
SOURCE: my android tablet is "frozen". Will turn on but
has anything been deleted from it when it has been plugged into a computer or has anything been deleted from the device itself from its root directory? if not and its gone like that by itself, it could be corrupted software or a missing root file which is usually bad at first, now what i know about some tablets is if it wont work theres a recovery file usually internally but this is in some tablets only that ive read about, i also have one but havent needed to try to restore it and it can be done from an engineering mode, this is possable by pressing the power button and another button like the home button at the same time once the unit is off untill it turns back on with options, but as for some models im not sure of but i will have to look this up at some stage as i am working on tablets at this time so unless you know what you are doing i wouldnt attempt it, once i have gotten through some tablets ill be able to give a better resolution on this subject with others. the advice ive given wont work for all as pressing power and home will start different options up on different tablets and versions.
this means that the program you were running has crashed. If it happens everytime you launch a particular application then I would advise removing the program from the tablet and then reloading it
327 views
Usually answered in minutes!
×