I need the code for my tvv 2v2000 - One For All URC-4021 Remote Control

Question edited for clarity.
Question moved to model category..

Torque specs and repair manual

https://www.google.com/search?q=2005+scion+xb+1.5+cylinder+head+bolt+torque

..

You will need to buy a digital to analog converter box.

If your power outage wad caused by a surge your tv may have died. Check fusebox for tripped circuit breaker also check tv wall plug fuse in case that has blown. It might be that the tv internal fuse has blown, you should disconnect the tvv from the electricity supply if you intend opening the rear of the set to check this.
If they are all okay the set probably needs the services of a trained technician

Good Luck

02987,02945,02993. Try these codes. If you wish to get more; check the sites linked here. Both the sites have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

You can get the manual and codes for the remote on the link below
http://oneforall-na.com/remote.php?type=URC%203021

so its bad? Thermal Vacuum Valve. Rare to be bad.

Sorry no Pun Intended here get a new car.
hope this helps

Hello,

you need to go to lg service in your area. they will get the part for you.should not cost to much . because the problem could be the sensor of the television or some faulty components.
Hope this works.....

Try taking the batteries out of the remote, then pressing the power button on the remote for 5 seconds. Then replace the batteries. This should have reset the remote and should work.