Problem with canon pixma mp230 all-in-one error code 9,230,0

SOURCE: canon pixma ip 1500

anon PIXMA iP1000
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Pls use software for permanent reset"

SOURCE: Canon PIXMA MP140 error code E 2

error E 2 => The machine is out of paper. / Paper does not feed.

Reload paper in the Auto Sheet Feeder and press the Black or Color button.

SOURCE: Error code 5110 Canon Pixma MP500

Error 5110 = Kann den Schlitten nicht anheben. (mechanischer Fehler)

SOURCE: my canon pixma mp830 shows error code 5010. what

The scanner lock switch may be in the locked position. Lift the cover and check the slide switch located on the top front left. If this is not the problem, you will have to have a service center look at the problem.

SOURCE: Any help with a Canon Pixma MP 250 P2 Error Code?

I found you a site where you can download the latest drivers to install at the link below Good Luck

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=All-in-One Printers&series=All-in-One Printers&model=PIXMA MP250&menu=Download